Tender specification texts for KentixONE SmartAccess online access system
==========================================================================================

1. KentixONE Wireless Online Access Systems
	1.1 Access Manager (KXP-16)
    	1.2. Master card set (KXC-PS1)
	1.3. RFID radio wall reader (KXC-WA1)
        		1.3.1. Wall reader housing GIRA TX44 (KXC-WA1-GIRATX44-XX)
        		1.3.1. Wall reader housing GIRA S-Color (KXC-WA1-GIRA-S-XX)
	1.4. RFID radio wall reader outdoor (KXC-WA1-OUTDOOR)
	1.5. RFID radio cabinet lock (KXC-RA1)
	1.6. RFID radio knob basic indoor (KXC-KN1)
	1.7. RFID radio knob basic outdoor (KXC-KN2)
    	1.8. RFID radio knob Pro indoor (KXC-KN4-IP55)
    	1.9. RFID radio knob pro outside (KXC-KN4-IP66)
	1.10. Profile cylinder up to 80mm standard (KXC-80-AABB)
	1.11. Profile cylinder up to 140mm standard (KXC-140-AABB)
	1.12. Profile cylinder anti-panic up to 80mm (KXC-80AP-AABB)
	1.13. Profile cylinder anti-panic up to 140mm (KXC-140AP-AABB)
	1.14. Profile half cylinder up to 50mm (KXC-50-AA)
	1.15. RFID radio lever handle, round rose, L-shape (KXC-LE-R-L-I-R / KXC-LE-R-L-I-L)
 	1.16. RFID radio lever handle, oval rose, L-shape (KXC-LE-O-L-I-R / KXC-LE-O-L-I-L)
    	1.17. RFID radio lever handle, round rose, U-shape (KXC-LE-R-U-I-R / KXC-LE-R-U-I-L)
	1.18. RFID radio lever handle, oval rose, U-shaped (KXC-LE-O-U-I-R / KXC-LE-O-U-I-L)
2. KentixONE wired online access systems
  	2.1. Network relay module for, among others, IP RFID wall reader KXC-WA3-IP2 (KXP-2-RS)
	2.2. Kentix IP racklock system RA4
		2.2.1. Kentix IP racklock left turn (KXC-RA4-IP2-L)
    		2.2.2. Kentix IP racklock right turn (KXC-RA4-IP2-R)
		2.2.3. RA4 distribution box with magnetic contacts (KXC-RA4-DB-BUS-SET)
		2.2.4. RA4 distribution box for connection to PDU (KXC-RA4-DB-PDU)
		2.2.5. Racklock adapter for various rack systems Rittal, Vertiv, Stengel, Schroff, APC, Modulan, etc. (KXC-RA4-XXXX)
	2.3. IP RFID wall reader(KXC-WA3-IP2)
	2.4. IP RFID wall reader outdoor IP66 (KXC-WA3-IP2-OUTDOOR)
	2.5. IP RFID wall reader for 55mm mounting frame (KXC-WA2-IP2)
	2.6. IP RFID frame reader (KXC-WA6-IP2)
	2.7. IP RFID fingerprint reader (KXC-WA5-IP2)
3. Accessories for the KentixONE SmartAccess Online access system
	3.1. RFID transponder MIFARE DESFire 2k EV2 (KKT-M)
    	3.2. Low-power adapter (KXC-BAT2)

	
==========================================================================================

1.1. Access-Manager (KXP-16)

AccessManager(PoE) with integrated web server for the management of up to 16 wireless locking components, 5,000 users in 100 time and 100 authorization profiles. Up to 999 AccessManagers can be networked in Master/Slave mode to form a multi-site system. LDAP support and full REst API for easy and efficient integration with third party systems. License-free software included, iOS/Android app operation available. Radio range approx. 25m, for indoor installation. System socket for connecting up to 2 external sensors (e.g. magnetic door contacts) and 2 potential-free outputs (e.g. relay switching). 

Technical data:
Housing color black or white 
Integrated web server (HTTPS) with REst-API & web hooks
Operation via web frontend, app and cloud service, REst-API
Remote opening possible
Up to 16 wireless locking components can be connected per Access Manager
5,000 users in 100 time and authorization profiles each manageable via web frontend, REst-API, LDAP or csv import/export
Up to 999 Access Managers or IP SmartRelay modules can be networked across locations in Master Slave mode
Logbook for 250,000 locking events (downloadable)
Central update management (master/slave distribution)
Battery monitoring of wireless locking components with e-mail information
Reporting of critical system states and incorrect bookings
Separate system logbook
Recording of video images via IP cameras on micro-SD card
Piezo signal generator 85dB(A), 2,3kHz in 3m distance
Power supply 10-32VDC
Power consumption approx. 3W, temperature range 0-50°C
Size 90x90x45mm

Integrated interfaces:
Ethernet: 1x (RJ45) according to IEEE 802.3 via 10/100BaseT
Radio: 868Mhz, AES 128bit encrypted
Web frontend, REst-API, web hooks, LDAP compatibility
System jack (RJ45): Kentix system jack for plug'n play connection of external relays and inputs

Scope of delivery: AccessManager, mounting bracket, mounting material, SlimLine cable 3m

Unit: Piece

Kentix part number: KXP-16

==========================================================================================
1.2. Master card set (Type: KXC-PS1)

Master card set in transponder card design.
Authorization medium for programming operations and service on door units. 
Master card set in MIFARE® DESFire® technology for setting up and managing the access systems. 
One master card set is required per system/customer.

Scope of delivery: 1x master card, 2x service cards, 2x transponder cards, 1x battery replacement tool for online knob

Unit: Piece

Kentix article number: KXC-PS1
==========================================================================================

1.3 RFID radio wall reader (KXC-WA1)

Online radio wall reader with RFID reader unit for mounting in switch box or surface-mounted housing and can be combined with standard mounting frames (GIRA, Behnke, 2N, etc.), cover optionally selectable. Radio networkable with AccessManager.

Technical data:
Installation RFID radio wall reader for common switch systems
Power supply with 10-32VDC or 10-24VAC
Power consumption typically 0.8W
RFID reader:1 3.56MHz Mifare Classic, DESfire
Radio connection to AccessManager via AES 128bit encrypted 868MhZ connection
Acoustic signal generator 70dB, 2.3kHz and one red and one green LED each
Temperature range -20°C to 65°C / indoors
size 71mmx71mmx26mm

Scope of delivery: wall reader, quick start guide

Unit: piece

Kentix part number: KXC-WA1

==========================================================================================

1.3.1 Wall reader housing GIRA TX44 (KXC-WA1-GIRA-TX44-XX)

Wall reader housing for flush mounting for RFID radio wall reader (KXC-WA1), type: Gira TX44

Available in aluminum, anthracite and pure white

Scope of delivery: Wall reader housing

Kentix article number: KXC-WA1-GIRA-TX44-XX

==========================================================================================

1.3.2 Wall reader housing GIRA S-Color (KXC-WA1-GIRA-S-XX)

Wall reader housing for flush mounting for RFID radio wall reader (KXC-WA1), type: Gira S-Color

Available in pure white, gray and black

Scope of delivery: Wall reader housing

Kentix article number: KXC-WA1-GIRA-S-XX

==========================================================================================

1.4 RFID Radio Wall Reader Outdoor IP66 (KXC-WA1-OUTDOOR)

Online radio wall reader with RFID reader unit for surface mounting in splash-proof housing. Radio networkable with AccessManager.

Technical data:
Outdoor RFID radio wall reader for outdoor surface mounting
Power supply with 10-32VDC or 10-24VAC
Power consumption typically 0.8W
RFID reader:13.56MHz Mifare Classic, DESfire
Radio connection to AccessManager via AES 128bit encrypted 868MhZ connection
Acoustic beeper 70dB, 2,3kHz and one red and one green LED each
Temperature range -25°C to 65°C / outdoor use
IP66 protection class
Size 90mmx90mmx40mm

Scope of delivery: wall reader, quick start guide

Unit: piece

Kentix article number: KXC-WA1-OUTDOOR

==========================================================================================

1.5 RFID Radio Cabinet Lock (KXC-RA2-14/23)

RFID radio cabinet lock with electronic reader unit for metal and wooden doors indoors (e.g. IT/technology cabinets). Various locking levers and adapters optionally available.
Storage of up to 1,000 offline profiles in the radio cabinet lock (emergency access). 24/7 live monitoring and documentation by AccessManager and thereby control as well as management by web frontend, iOS/Android app (remote), REst-API, web hooks possible.

Technical data:
Approval according to DIN EN 15684
Structural modification of the door mostly not necessary
Locking lever and adapter for existing locking systems optionally available
No wiring of the door necessary
Contactless programming via 868 MHz AES 128bit encrypted radio communication
Identification by passive transponder without own power supply
Wake-up of the radio cabinet lock by illuminated, rubberized button - very long battery life
batteries AA lithium 3,6V
Up to 100.000 operations with one set of batteries
The last approx. 1,000 possible operations are regularly signaled by email and optically and acoustically by means of 3-stage battery management
Batteries can only be replaced when installed using a special battery replacement tool
Operating temperature range: 0° C to 55° C. 
Coupling time definable from 3 to 15 seconds (plus actuation time)
Continuous open-circuit possible without additional power consumption
868MHz AES 128bit encrypted radio networking via AccessManager
Integration of existing passive transponders possible
Transponder variants: 13.56 MHz: Mifare Classic, Mifare DESFire, Mifare DESFire EV1 (mixed operation possible)

Scope of delivery: RFID radio cabinet lock (14 or 23mm locking bolt), incl. battery AA lithium 3.6V (ER14505) and mounting material

Unit: piece

Kentix article number: KXC-RA2-14/23

==========================================================================================

1.6 RFID Radio Knauf Basic for Interior Doors IP55 (KXC-KN1)

RFID online knob with electronic reader in protection class IP55 for indoor use. Knob in nickel-plated brass. For profile cylinder DIN18252. Storage of up to 1,000 offline profiles in the knob (emergency access). 24/7 live monitoring and documentation by AccessManager and thereby control as well as management by web frontend, iOS/Android app, REst-API, web hooks possible.

Technical data:
According to DIN EN 15684 for electronic cylinders
Suitable for installation in PZ locks
Suitable for use on fire doors
No structural modification of the door necessary
No mounting holes necessary
No wiring of the door necessary
Contactless programming via 868 MHz AES 128bit encrypted radio communication
Identification by passive transponder without own power supply
Identification from inside via mechanical knob
No electrical contact in the cylinder
Automatic wake-up of the knob modules by presenting a passive transponder
2 batteries CR2 Lithium 3V per knob module
Up to 50,000 online operations with one set of batteries. 
The last approx. 1,000 possible actuations are regularly signaled by email and optically and acoustically by means of 3-stage battery management
Battery change is possible in installed condition
External power supply possible when batteries are completely discharged
Easy mounting by plugging the knobs onto the cylinder housing
Modular design of the cylinder - all knob variants can be flexibly removed and replaced
Batteries can only be changed with electronic battery change authorization
Disassembly of the knob module can only be carried out with electronic disassembly authorization
Disassembly of the knob module can be carried out without special tools
Operating temperature range: -20° C to 65° C.
Cylinder and knob housing as well as cover made of nickel-plated brass
Hard plastic cover in the antenna area
Automatic summer / winter time changeover
Coupling time definable from 3 to 15 seconds (plus actuation time)
Continuous open circuit possible without additional power consumption
868MHz AES 128bit encrypted radio networking via AccessManager
Integration of existing passive transponders possible
Transponder variants: 13.56 MHz: Mifare Classic, Mifare DESFire, Mifare DESFire EV1 (mixed operation possible)
Protection class IP55

Scope of delivery: complete knob, incl. batteries (CR2).

Unit: piece

Kentix article number: KXC-KN1

==========================================================================================

1.7 RFID Radio Knob Basic for Exterior Doors IP66 (KXC-KN2)

RFID online knob with electronic reader in protection class IP66 for outdoor use. Knob in nickel-plated brass. For profile cylinder DIN18252. Storage of up to 1,000 offline profiles in the knob (emergency access). 24/7 live monitoring and documentation by AccessManager and thereby control as well as management by web frontend, iOS/Android app, REst-API, web hooks possible.

Technical data:
According to DIN EN 15684 for electronic cylinders
Suitable for installation in PZ locks
Suitable for use on fire doors
No structural modification of the door necessary
No mounting holes necessary
No wiring of the door necessary
Contactless programming via 868 MHz AES 128bit encrypted radio communication
Identification by passive transponder without own power supply
Identification from inside via mechanical knob
No electrical contact in the cylinder
Automatic wake-up of the knob modules by presenting a passive transponder
2 batteries CR2 Lithium 3V per knob module
Up to 50,000 online operations with one set of batteries. 
The last approx. 1,000 possible actuations are regularly signaled by email and optically and acoustically by means of 3-stage battery management
Battery change is possible in installed condition
External power supply possible when batteries are completely discharged
Easy mounting by plugging the knobs onto the cylinder housing
Modular design of the cylinder - all knob variants can be flexibly removed and replaced
Batteries can only be changed with electronic battery change authorization
Disassembly of the knob module can only be carried out with electronic disassembly authorization
Disassembly of the knob module can be carried out without special tools
Operating temperature range: -20° C to 65° C.
Cylinder and knob housing as well as cover made of nickel-plated brass
Hard plastic cover in the antenna area
Automatic summer / winter time changeover
Coupling time definable from 3 to 15 seconds (plus actuation time)
Continuous open circuit possible without additional power consumption
868MHz AES 128bit encrypted radio networking via AccessManager
Integration of existing passive transponders possible
Transponder variants: 13.56 MHz: Mifare Classic, Mifare DESFire, Mifare DESFire EV1 (mixed operation possible)
Protection class IP66

Scope of delivery: complete knob, incl. batteries (CR2).

Unit: Piece

Kentix article number: KXC-KN2

==========================================================================================

1.8 RFID Radio Knauf Pro for interior doors IP55 (KXC-KN4-IP55)

Compact RFID online knob with electronic reader in protection class IP55 for indoor use. Knob in nickel-plated brass. For profile cylinder DIN18252. Storage of up to 1,000 offline profiles in the knob (emergency access). 24/7 live monitoring and documentation by AccessManager and thereby control as well as management by web frontend, iOS/Android app, REst-API, web hooks possible. Resistance class 2.

Technical data:
According to DIN EN 15684 for electronic cylinders.
Suitable for installation in PZ locks
Resistance class 2 due to firmly pressed cylinder
Suitable for use on fire doors
No structural modification of the door necessary
Compact 31.4mm of the knob also allow installation close to door frames
No mounting holes necessary
No wiring of the door necessary
Contactless programming via 868 MHz AES 128bit encrypted radio communication
Identification by passive transponder without own power supply
Identification from inside via mechanical knob
No electrical contact in the cylinder
Automatic wake-up of the knob modules by presenting a passive transponder
1 CR2 Lithium 3V batteries per knob module
Up to 50,000 online operations with one set of batteries. 
The last approx. 1,000 possible actuations are regularly signaled by e-mail and optically and acoustically by means of 3-stage battery management
Battery change is possible in installed condition
External power supply possible when batteries are completely discharged
Operating temperature range: -20° C to 65° C.
Cylinder and knob housing as well as cover made of nickel-plated brass
In the antenna area hard plastic cover
Automatic summer / winter time changeover
Coupling time definable from 3 to 15 seconds (plus actuation time)
Continuous open circuit possible without additional power consumption
868MHz AES 128bit encrypted radio networking via AccessManager
Integration of existing passive transponders possible
Transponder variants: 13.56 MHz: Mifare Classic, Mifare DESFire, Mifare DESFire EV1 (mixed operation possible)
Protection class IP55

Scope of delivery: complete knob, incl. batteries (CR2).

Unit: piece

Kentix article number: KXC-KN4-IP55

==========================================================================================

1.9 RFID Wireless Knob Pro for Exterior Doors IP66 (KXC-KN4-IP66)

Compact RFID online knob with electronic reader in protection class IP66 for outdoor use. Knob in nickel-plated brass. For profile cylinder DIN18252. Storage of up to 1,000 offline profiles in the knob (emergency access). 24/7 live monitoring and documentation by AccessManager and thereby control as well as management by web frontend, iOS/Android app, REst-API, web hooks possible. Resistance class 2.

Technical data:
According to DIN EN 15684 for electronic cylinders.
Suitable for installation in PZ locks
Resistance class 2 due to firmly pressed cylinder
Suitable for use on fire doors
No structural modification of the door necessary
Compact 31.4mm of the knob also allow installation close to door frames
No mounting holes necessary
No wiring of the door necessary
Contactless programming via 868 MHz AES 128bit encrypted radio communication
Identification by passive transponder without own power supply
Identification from inside via mechanical knob
No electrical contact in the cylinder
Automatic wake-up of the knob modules by presenting a passive transponder
1 CR2 Lithium 3V batteries per knob module
Up to 50,000 online operations with one set of batteries. 
The last approx. 1,000 possible actuations are regularly signaled by e-mail and optically and acoustically by means of 3-stage battery management
Battery change is possible in installed condition
External power supply possible when batteries are completely discharged
Operating temperature range: -20° C to 65° C.
Cylinder and knob housing as well as cover made of nickel-plated brass
In the antenna area hard plastic cover
Automatic summer / winter time changeover
Coupling time definable from 3 to 15 seconds (plus actuation time)
Continuous open circuit possible without additional power consumption
868MHz AES 128bit encrypted radio networking via AccessManager
Integration of existing passive transponders possible
Transponder variants: 13.56 MHz: Mifare Classic, Mifare DESFire, Mifare DESFire EV1 (mixed operation possible)
Protection class IP66

Scope of delivery: complete knob, incl. batteries (CR2).

Unit: Piece

Kentix article number: KXC-KN4-IP66

==========================================================================================

1.10. Profile cylinder up to 80mm standard (KXC-80-AABB)

Profile cylinder standard with a total cylinder length up to 80mm with mechn. turn knob, incl. forend screw for use with RFID online knob for inside and outside.

Technical data:
According to DIN EN 15684 for electronic cylinders
Suitable for installation in PZ locks
Suitable for use on fire doors
Version available for installation in core pull protection fittings
Profile cylinder lengths of 30/30 mm in 5 mm increments (total length max. 80 mm)
Inside/outside freely selectable

Scope of delivery: profile cylinder, mechn. inside knob, forend screw

Unit: piece

Kentix article number: KXC-80-AABB

==========================================================================================

1.11. Profile cylinder up to 140mm standard (KXC-140-AABB)

Profile cylinder standard with a total cylinder length up to 140mm with mechn. turn knob, incl. forend screw for use with RFID online knob for inside and outside.

Technical data:
According to DIN EN 15684 for electronic cylinders
Suitable for installation in PZ locks
Suitable for use on fire doors
Version available for installation in core pull protection fittings
Profile cylinder lengths from 45/40 mm to in 5 mm steps (total length max. 140mm)
inside/outside freely selectable

Scope of delivery: profile cylinder, mechn. inside knob, forend screw

Unit: piece

Kentix article number: KXC-140-AABB

==========================================================================================

1.12. Profile cylinder with anti-panic function up to 80mm standard (KXC-80AP-AABB)

Profile cylinder for escape doors with total cylinder length up to 80mm with mechn. turn knob, incl. forend screw for use with RFID online knob for inside and outside.

Technical data:
According to DIN EN 15684 for electronic cylinders
Suitable for use in panic doors with defined latch position
Suitable for installation in PZ locks
Suitable for use on fire doors
Version available for installation in core pull protection fittings
Profile cylinder lengths of 30/30 mm in 5 mm increments (total length max. 80 mm)

Scope of delivery: profile cylinder with anti-panic function, mechn. inside knob, forend screw

Unit: piece

Kentix article number: KXC-80AP-AABB

==========================================================================================

1.13. Profile cylinder with anti-panic function up to 140mm standard (type: KXC-140AP-AABB)

Profile cylinder for escape doors with a total cylinder length up to 140mm with mechn. turn knob, incl. forend screw for use with RFID online knob for inside and outside.

Technical data:
According to DIN EN 15684 for electronic cylinders
Suitable for installation in PZ locks
Suitable for use in panic doors with defined latch position
Suitable for use on fire doors
Version available for installation in core pull protection fittings
Profile cylinder lengths of 45/40 mm in 5 mm increments (total length max. 140 mm)

Scope of delivery: profile cylinder with anti-panic function, mechn. inside knob, forend screw

Unit: piece

Kentix article number: KXC-140AP-AABB

==========================================================================================

1.14. Profile half cylinder up to 50mm (type: KXC-50-AA)

Profile half cylinder with total cylinder length up to 50mm, including forend screw for use with RFID online knob for indoor and outdoor.

Technical data:
According to DIN EN 15684 for electronic cylinders
Suitable for installation in PZ locks
Suitable for use on fire doors
Suitable for IT cabinet locks and key switches with PZ insert
Profile cylinder lengths from 30mm to 40 mm in 5 mm steps

Scope of delivery: profile half cylinder, forend screw

Unit: piece

Kentix article number: KXC-50-AA

==========================================================================================

1.15. RFID radio lever handle, round rose, L-shape (KXC-LE-R-L-I-R / KXC-LE-R-L-I-L)

RFID radio lever handle (MIFARE) LEFT, round rose, L-SHAPE with electronic reader in protection class IP55 for indoor use. Handle in stainless steel. Approval according to DIN15684. Storage of up to 1,000 offline profiles in the knob (emergency access). 24/7 live monitoring and documentation by AccessManager and thereby control as well as management by web frontend, iOS/Android app, REst-API, web hooks possible.

Technical data:
Approval according to DIN EN 15684
For indoor use	
Electronic fitting with integrated read/evaluation electronics.
Identification is contactless by passive transponder without own power supply
Battery can be changed from the outside without dismantling the fitting
Up to 100,000 online operations with one battery set. 
The last approx. 1,000 possible actuations are regularly signaled by email and optically and acoustically by means of 3-stage battery management
No wiring in the door or frame necessary
For use on wooden, steel, aluminum and narrow frame doors with a backset of >30mm possible
Continuous engagement possible without additional power consumption (daily activation)
Fitting made of full metal, antenna cover made of plastic
Event log for 512 events
Automatic changeover between summer and winter time
Up to 1,000 locking authorizations can be stored in the door handle (emergency access)
Automatic wake-up of the electronics by holding the transponder in front of it
Integrated light bar for visual signaling
Clutch mechanism tested to 60 Nm load
Integrated 868 MHz radio chip with AES 128bit encryption for radio networking via AccessManager
Coupling time definable from 3 to 15 seconds (plus actuation time)
Continuous open-circuit possible without additional power consumption
Operation from outside by presenting an authorized transponder
Power supply via lithium battery 3V (CR123A)
Operating temperature +5 to +55°C
Transponder variants: 13.56 MHz: Mifare Classic, Mifare DESFire, Mifare DESFire EV1 (mixed operation possible)
Available for square thicknesses of 8-10mm

Scope of delivery: RFID lever handle, mechn. lever handle, rosettes, incl. battery (CR123A).

Unit: piece
 
Kentix part number: KXC-LE-R-L-I-R (RIGHT), KXC-LE-R-L-I-L (LEFT)

==========================================================================================

1.16. RFID radio lever handle, oval rose, L-shaped (Type: KXC-LE-O-L-I-R / KXC-LE-O-L-I-L)

RFID radio lever handle (MIFARE) LEFT, oval rose, L-SHAPE with electronic reader in protection class IP55 for indoor use. Handle in stainless steel. Approval according to DIN15684. Storage of up to 1,000 offline profiles in the knob (emergency access). 24/7 live monitoring and documentation by AccessManager and thereby control as well as management by web frontend, iOS/Android app, REst-API, web hooks possible.

Technical data:
Approval according to DIN EN 15684
For indoor use	
Electronic fitting with integrated read/evaluation electronics.
Identification is contactless by passive transponder without own power supply
Battery can be changed from the outside without dismantling the fitting
Up to 100,000 online operations with one battery set. 
The last approx. 1,000 possible actuations are regularly signaled by email and optically and acoustically by means of 3-stage battery management
No wiring in the door or frame necessary
For use on wooden, steel, aluminum and narrow frame doors with a backset of >30mm possible
Continuous engagement possible without additional power consumption (daily activation)
Fitting made of full metal, antenna cover made of plastic
Event log for 512 events
Automatic changeover between summer and winter time
Up to 1,000 locking authorizations can be stored in the door handle (emergency access)
Automatic wake-up of the electronics by holding the transponder in front of it
Integrated light bar for visual signaling
Clutch mechanism tested to 60 Nm load
Integrated 868 MHz radio chip with AES 128bit encryption for radio networking via AccessManager
Coupling time definable from 3 to 15 seconds (plus actuation time)
Continuous open-circuit possible without additional power consumption
Operation from outside by presenting an authorized transponder
Power supply via lithium battery 3V (CR123A)
Operating temperature +5 to +55°C
Transponder variants: 13.56 MHz: Mifare Classic, Mifare DESFire, Mifare DESFire EV1 (mixed operation possible)
Available for square thicknesses of 8-10mm

Scope of delivery: RFID lever handle, mechn. lever handle, rosettes, incl. battery (CR123A).

Unit: piece
 
Kentix part number: KXC-LE-O-L-I-R (RIGHT), KXC-LE-O-L-I-L (LEFT)

==========================================================================================

1.17. RFID radio lever handle, round rose, U-shape (KXC-LE-R-U-I-R / KXC-LE-R-U-I-L)

RFID radio lever handle (MIFARE) LEFT, round rose, U-SHAPE with electronic reader in protection class IP55 for indoor use. Handle in stainless steel. Approval according to DIN15684. Storage of up to 1,000 offline profiles in the knob (emergency access). 24/7 live monitoring and documentation by AccessManager and thereby control as well as management by web frontend, iOS/Android app, REst-API, web hooks possible.

Technical data:
Approval according to DIN EN 15684
For indoor use	
Electronic fitting with integrated read/evaluation electronics.
Identification is contactless by passive transponder without own power supply
Battery can be changed from the outside without dismantling the fitting
Up to 100,000 online operations with one battery set. 
The last approx. 1,000 possible actuations are regularly signaled by email and optically and acoustically by means of 3-stage battery management
No wiring in the door or frame necessary
For use on wooden, steel, aluminum and narrow frame doors with a backset of >30mm possible
Continuous engagement possible without additional power consumption (daily activation)
Fitting made of full metal, antenna cover made of plastic
Event log for 512 events
Automatic changeover between summer and winter time
Up to 1,000 locking authorizations can be stored in the door handle (emergency access)
Automatic wake-up of the electronics by holding the transponder in front of it
Integrated light bar for visual signaling
Clutch mechanism tested to 60 Nm load
Integrated 868 MHz radio chip with AES 128bit encryption for radio networking via AccessManager
Coupling time definable from 3 to 15 seconds (plus actuation time)
Continuous open-circuit possible without additional power consumption
Operation from outside by presenting an authorized transponder
Power supply via lithium battery 3V (CR123A)
Operating temperature +5 to +55°C
Transponder variants: 13.56 MHz: Mifare Classic, Mifare DESFire, Mifare DESFire EV1 (mixed operation possible)
Available for square thicknesses of 8-10mm

Scope of delivery: RFID lever handle, mechn. lever handle, rosettes, incl. battery (CR123A).

Unit: piece
 
Kentix part number: KXC-LE-R-U-I-R (RIGHT), KXC-LE-R-U-I-L (LEFT)

==========================================================================================

1.18. RFID radio lever handle, oval rose, U-shaped (Type: KXC-LE-O-U-I-R / KXC-LE-O-U-I-L)

RFID radio lever handle (MIFARE) LEFT, oval rose, U-SHAPE with electronic reader in protection class IP55 for indoor use. Lever handle in stainless steel. Approval according to DIN15684. Storage of up to 1,000 offline profiles in the knob (emergency access). 24/7 live monitoring and documentation by AccessManager and thereby control as well as management by web frontend, iOS/Android app, REst-API, web hooks possible.

Technical data:
Approval according to DIN EN 15684
For indoor use	
Electronic fitting with integrated read/evaluation electronics.
Identification is contactless by passive transponder without own power supply
Battery can be changed from the outside without dismantling the fitting
Up to 100,000 online operations with one battery set. 
The last approx. 1,000 possible actuations are regularly signaled by email and optically and acoustically by means of 3-stage battery management
No wiring in the door or frame necessary
For use on wooden, steel, aluminum and narrow frame doors with a backset of >30mm possible
Continuous engagement possible without additional power consumption (daily activation)
Fitting made of full metal, antenna cover made of plastic
Event log for 512 events
Automatic changeover between summer and winter time
Up to 1,000 locking authorizations can be stored in the fitting (emergency access)
Automatic wake-up of the electronics by holding the transponder in front of it
Integrated light bar for visual signaling
Coupling mechanism tested to 60 Nm load
Integrated 868 MHz radio chip with AES 128bit encryption for radio networking via AccessManager
Coupling time definable from 3 to 15 seconds (plus actuation time)
Continuous open-circuit possible without additional power consumption
Operation from outside by presenting an authorized transponder
Power supply via lithium battery 3V (CR123A)
Operating temperature +5 to +55°C
Transponder variants: 13.56 MHz: Mifare Classic, Mifare DESFire, Mifare DESFire EV1 (mixed operation possible)
Available for square thicknesses of 8-10mm

Scope of delivery: RFID lever handle, mechn. lever handle, rosettes, incl. battery (CR123A).

Unit: Piece
 
Kentix part number: KXC-LE-O-U-I-R (RIGHT), KXC-LE-O-U-I-L (LEFT)

==========================================================================================

2.1. network relay module for e.g. IP RFID wall reader KXC-WA3-IP2 (Type: KXP-2-RS)

Network relay module (PoE Class 3) with integrated web server for controlling up to 2 IP wall readers and two 2 electronically connected doors (e.g. door with motor lock). Management of 5,000 users in 100 time and 100 authorization profiles. Up to 999 access managers can be networked in master/slave mode to form a multi-site system. LDAP support and full REst API for easy and efficient integration with third party systems. License-free software included, iOS/Android app's operation available. Mounting in flush-mounted box or on top-hat rail. Terminal connections: 2x voltage supplied outputs (e.g. motor lock), 2x potential free inputs (e.g. door magnetic contacts).


Technical data:
Housing color black
Integrated web server (HTTPS) with REst-API & web hooks
Operation via web frontend, app and cloud service, REst-API
Remote opening possible
Up to 2 IP RFID wall readers or optional RFID wide range readers connectable via 4-wire RS485
5,000 users in 100 time and authorization profiles each manageable via web frontend, REst-API, LDAP or csv import/export
Up to 999 network relay modules or AccessManagers can be networked across locations in Master Slave mode
Logbook for 250,000 locking events (downloadable)
Central update management (master/slave distribution)
Reporting of critical system states and incorrect bookings
Separate system logbook
Recording of video images via IP cameras on micro-SD card
Power supply 10-32VDC
Power consumption approx. 4W, temperature range 0-50°C
Mounting in flush-mounted box (60mm) or DIN rail (top-hat rail)
Size 47x48x33mm

Integrated interfaces:
Ethernet: 1x (RJ45) according to IEEE 802.3 via 10/100BaseT
Web-Frontend, REst-API, Web-Hooks, LDAP compatibility
1x RS485 for connection of up to 2 readers
2x voltage supplied outputs (24VDC/500mA (short time 1A))
2x potential free digital inputs

Scope of delivery: network relay modules, SlimLine cable 3m

Unit: piece

Kentix article number: KXP-2-RS

==========================================================================================
2.2.1 Kentix IP racklock left turn (Type: KXC-RA4-IP2-L)

IT cabinet handle (left turning) in robust metal-plastic design as a hinged lever. This means that the handle does not require a swivel range and enables ergonomic handling. The connection is made completely via patch cable. Up to 16 handles can be connected per network relay module. Any number of network relay modules can be networked together. A reed contact can be connected to each IP rack handle via the distribution box (KXC-RA4-DB-BUS-SET), which reliably monitors the closing and locking status of the rack door. The power supply is PoE and is therefore easily integrated into the UPS power supply. A redundant power supply via an additional 24V/DC source is possible with the supplied adapter.
Max. Cable length between network relay module and rack lever approx. 400m. Series and star cabling of the bus connection is possible.

Technical data:

Mechatronic rack handle as folding lever in black.
Connection possibilities: 	Network relay module KXP-2-RS (up to 16 rack handles)
			SmartPDU (2 rack handle)
Networking: 16 recourse to network relay module in BUS topology
		Cable length up to 400m, standard patch cable CAT5
RFID reader: 13,56MHz MIFAR DESFire EV1/2, MIFRÀRE Classic, Legic optional possible
PIN keypad: Touch PIN keypad with 4 keys
Handle status: Lever position detection sensor (open/closed)
beeper: acoustic beeper 70dB, 2.3kHz
LED: RED, GREEN
Connection: RJ45 on back, standard patch cable CAT5
Door contact:	RJ45 connection via distribution box in connecting cable
Power supply:	Via network relay module (PoE) or SmartPDU (system port)
Dimension: 250 x 34 x 31mm (LxWxH)
Material: Plastic, cast metal
Emergency opening: Up to 1,000 locking authorizations can be stored in the reader (emergency access). Mechanical opening possible with special tool
Operating temperature: Temperature -10°C to 55°C for indoor use
Protection class: IP30
Tests:	CE

Scope of delivery: Rack lever with RFID reader, SlimLine cable 3m

Unit: Piece

Kentix part number: KXC-RA4-IP2-L

==========================================================================================
2.2.2 Kentix IP rack lock right turn (type: KXC-RA4-IP2-R)

IT cabinet handle (right turn) in robust metal-plastic design as a hinged lever. This means that the handle does not require a swivel range and enables ergonomic handling. The connection is made completely via patch cable. Up to 16 handles can be connected per network relay module. Any number of network relay modules can be networked together. A reed contact can be connected to each IP rack handle via the distribution box (KXC-RA4-DB-BUS-SET), which reliably monitors the closing and locking status of the rack door. The power supply is PoE and is therefore easily integrated into the UPS power supply. A redundant power supply via an additional 24V/DC source is possible with the supplied adapter.
Max. Cable length between network relay module and rack lever approx. 400m. Series and star cabling of the bus connection is possible.

Technical data:

Mechatronic rack handle as folding lever in black.
Connection possibilities: 	Network relay module KXP-2-RS (up to 16 rack handles)
			SmartPDU (2 rack handle)
Networking: 16 recourse to network relay module in BUS topology
		Cable length up to 400m, standard patch cable CAT5
RFID reader: 13,56MHz MIFAR DESFire EV1/2, MIFRÀRE Classic, Legic optional possible
PIN keypad: Touch PIN keypad with 4 keys
Handle status: Lever position detection sensor (open/closed)
beeper: acoustic beeper 70dB, 2.3kHz
LED: RED, GREEN
Connection: RJ45 on back, standard patch cable CAT5
Door contact:	RJ45 connection via distribution box in connecting cable
Power supply:	Via network relay module (PoE) or SmartPDU (system port)
Dimension: 250 x 34 x 31mm (LxWxH)
Material: Plastic, cast metal
Emergency opening: Up to 1,000 locking authorizations can be stored in the reader (emergency access). Mechanical opening possible with special tool
Operating temperature: Temperature -10°C to 55°C for indoor use
Protection class: IP30
Tests:	CE

Scope of delivery: Rack lever with RFID reader, SlimLine cable 3m

Unit: Piece

Kentix article number: KXC-RA4-IP2-R

==========================================================================================
2.2.3 RA4 distribution box with magnetic contacts (type: KXC-RA4-DB-BUS-SET)

Distribution box for wiring and distribution in the rack to two Kentix RA4 rack lever handles and two door contacts. For connection to a SmartRelay via BUS cabling (RJ45).

Size (WxLxH): 39x68.5x23.5mm 

Scope of delivery: distribution box, 2x magnetic contact

Unit: piece

Kentix article number: KXC-RA4-DB-BUS-SET

==========================================================================================
2.2.4 RA 4 distribution box for connection to PDU (type: KXC-RA4-DB-PDU)

Distribution box for cabling and distribution in the rack to two Kentix RA4 rack lever handles and two door contacts. For connection to the PDU system port via BUS cabling (RJ45).

Scope of delivery: Distribution box
Unit: Piece

Kentix part number: KXC-RA4-DB-PDU-SET

==========================================================================================
2.2.5. rack lever adapter RA4 for different rack systems Rittal, Vertiv, Stengel, Schroff, APC, Modulan, etc. (KXC-RA4-XXXX)

Rack lever adapter to adapt the RA4 hinged lever to different rack systems.
Consideration of the rack door design (straight/slanted) and closing mechanism.

Scope of delivery: rack lever adapter, mounting material

Unit: piece

Kentix part number: KXC-RA4-XXXX
==========================================================================================
2.3 IP RFID wall reader(KXC-WA3-IP2)

IP RFID wall reader with integrated RFID reader and illuminated touch PIN keypad and audible and visual beeper. Connection to and power supply from the network relay module (KXP-2-RS). Mounting in flush-mounted switch box or optional surface-mounted housing indoors or outdoors with protection class IP54.

Technical data:

Control panel color black, housing color silver
Connection and supply by network relay module (RS484 - 4 wire), up to 500m cable length
RFID reader: MIFARE® DESFire® 13.56MHz, MIFARE® Classic, LEGIC prime, LEGIC advant, ISO14443A (CSN / UID), ISO15693 (CSN / UID), Sony FeliCa (CSN / UID), Inside Secure (CSN / UID)
2-factor authentication by RFID and PIN code possible
Up to 1,000 locking authorizations can be stored in the reader (emergency opening)
Acoustic signal generator and RGB light field
Power consumption approx. 4W, 
Temperature range 25-60°C
Protection class IP54
Mounting in flush-mounted box (60mm) or optional surface-mounted housing
Size 88 x 99 x 27 mm (flush mounting), 88 x 99 x 40 mm (surface mounting)

Scope of delivery: wall reader with touch PIN keypad, mounting material

Unit: Piece

Kentix article number: KXC-WA3-IP2

==========================================================================================

2.4 IP RFID wall reader(KXC-WA3-IP2-OUTDOOR)

IP RFID wall reader with integrated RFID reader and acoustic and optical signal generator. Connection to and power supply from the network relay module (KXP-2-RS). Mounted in weatherproof surface-mount housing with IP66 protection class.

Technical data:
Housing color black
Connection and supply by network relay module (RS484 - 4 wire), up to 500m cable length
RFID reader: MIFARE® DESFire® 13.56MHz, MIFARE® Classic, LEGIC prime, LEGIC advant, ISO14443A (CSN / UID), ISO15693 (CSN / UID), Sony FeliCa (CSN / UID), Inside Secure (CSN / UID)
2-factor authentication by RFID and PIN code possible
Up to 1,000 locking authorizations can be stored in the reader (emergency opening)
Acoustic signal generator and red, green LED
Power consumption approx. 4W, 
Temperature range -30°C to 70°C
Protection class IP66
Mounting in surface box
100 x 100 x 40 mm

Scope of delivery: wall reader in IP66 housing, mounting material

Unit: piece

Kentix article number: KXC-WA3-IP2

==========================================================================================

2.5 IP RFID wall reader for 55mm mounting frame (KXC-WA2-IP2)

IP RFID wall reader with integrated RFID reader and illuminated touch PIN keypad and audible and visual beeper. Connection to and power supply from the network relay module (KXP-2-RS). Mounts in flush-mount switch box and standard 55mm x 55mm mounting frame.

Technical data:
Control panel color white
Connection and supply by network relay module (RS484 - 4 wire), up to 500m cable length
RFID reader: MIFARE® DESFire® 13,56MHz, MIFARE® Classic, LEGIC prime, LEGIC advant, ISO14443A (CSN / UID), ISO15693 (CSN / UID), Sony FeliCa (CSN / UID), Inside Secure (CSN / UID)
2-factor authentication by RFID and PIN code possible
Up to 1,000 locking authorizations can be stored in the reader (emergency opening)
Acoustic signal generator and RGB light field
Power consumption approx. 4W, 
Temperature range 25-60°C
Protection class IP20
Mounting in flush-mounted switch box (60mm) and 50mm x 50mm mounting frame
Size 71 x 71 x 27 mm (board and keypad), 55 x 55 mm (keypad)

Scope of delivery: wall reader with touch PIN keypad, mounting material

Unit: piece

Kentix article number: KXC-WA2-IP2

==========================================================================================
2.6 IP RFID frame reader (type: KXC-WA6-IP2)

IP RFID frame reader with integrated RFID reader. The frame reader is especially suitable for use with narrow metal profiles. Two-factor authentication possible. Connection to and power supply from the network relay module (KXP-2-RS). Mounting directly on the frame and wall indoors or outdoors with IP66 protection class.

Technical data:
Control panel color black, housing color silver
Connection and supply by network relay module (RS484 - 4 wire), up to 500m cable length
RFID reader: MIFARE® DESFire® 13.56MHz, MIFARE® Classic, LEGIC prime, LEGIC advant, ISO14443A (CSN / UID), ISO15693 (CSN / UID), Sony FeliCa (CSN / UID), Inside Secure (CSN / UID)
2-factor authentication by RFID and PIN code possible
Up to 1,000 locking authorizations can be stored in the reader (emergency opening)
Acoustic signal generator and RGB light field
Power consumption approx. 4W, 
Temperature range 25-60°C
Protection class IP66
Mounting directly on frame or wall
Size 33 x 131 x 17 mm

Scope of delivery: Compact wall reader with PIN keypad, mounting material

Unit: Piece

Kentix article number: KXC-WA6-IP2

==========================================================================================

2.7. IP RFID fingerprint reader (KXC-WA5-IP2).

Biometric reader for two-factor authentication with MifareDesfire card and biometric feature. It is managed via the SmartRelay module. Authorized access is possible only by the person whose card matches the finger. The reader can be combined with all other Kenitx readers.

Technical data:

IP fingerprint reader in white for surface mounting for connection to Network Relay module.
RFID reader: MIFARE DESFire 13,56MHz, MIFARE® Classic, LEGIC prime, LEGIC advant,
		ISO14443A (CSN / UID), ISO15693 (CSN / UID)
dimensions: 96 x 123 x 55 mm WxHxD (surface mount)
LED: RED, GREEN, YELLOW, BLUE
Signaling: Acute signal generator, LED
connection wall reader: via relay module 4-wire, length up to 500m
			up to two fingerprint readers can be connected
Connection electronics - door opener/lock: 24VDC/500mA (short-term 1A) via integrated PoE splitter or external, 2 relays: 125VAC/60VDC, 1A, change-over contact
Operating temperature: wall reader -10°C to +55°C
Protection class: IP54

Scope of delivery: wall reader RFID with fingerprint sensor

Unit: piece

Kentix article number: KXC-WA5-IP2
	
==========================================================================================
3.1 RFID transponder MIFARE DESFire 2k EV2 (type: KKT-M)
Kentix RFID transponder key fobs with 8kbyte memory EV2 - 70pF, based on MIFARE®DESFire® technology (13.56MHz). By default the tokens are written with a special Kentix security application, but can also be written with a custom security application according to standard.

Scope of delivery: Transponder key fob 
Unit: Piece

Kentix article number: KKT-M

==========================================================================================
3.2 Low-power adapter (type: KXC-BAT2)

Low-power adapter for Kentix DoorLock-DC. Needed for emergency opening and battery change when battery is completely empty.

Scope of delivery: battery change tool, 9V block battery, suction cup for front cover

Unit: Piece

Kentix part number: KXC-BAT2

==========================================================================================
END