integrate Kentix products into your network
Always connectable via Ethernet or radio
Freely scalable
(Outdoor)
SmartRelay
Body temperature measurement with the Kentix SmartXcan
Thanks to intelligent sensor technology, this is done completely contactless and can be easily used
without operating personnel.
Also available with integrated RFID-Reader.
or simply open doors remotely. The Kentix360 Cloud stores all important data and checks routinely and
independently the status of your Kentix monitoring or access system.
BASIC/PRO
The AlarmManager is mounted in the server room or rack and controls all alarm
and error messages to the responsible persons.
The AlarmManager-PRO supports up to 500 MultiSensors and KeyPads.
of IT and server rooms.
The MultiSensor-RF is used in conjunction with an AlarmManager
(or StarterSet).
With only one device you can monitor your IT infrastructure
to up to 19 physical hazards.
Alarms are immediately reported by email with all information.
your server environment.
The integrated web server allows all necessary settings
to be made directly on the device.
In the event of an alarm, the responsible persons are alerted by e-mail.
and moving objects including climate monitoring.
The Multi- Sensor-DOOR is battery operated and features a very high
long battery life (up to 4 years).
and for access control.
The KeyPad-Touch is equipped as standard with a
RFID card reader (MIFARE® DESFire®, LEGIC® advant).
via Plug'n'Play and continuously measures the conductivity
over several electrodes.
The leakage sensor can be cascaded up to 5 times.
IT racks and distributors.
Sensitivity can be adjusted directly on the sensor.
and is used to connect external alarm signals.
Up to 32 modules (max. 500 alarm inputs) can be connected to one
AlarmManager-PRO.
Authorization profiles using Web browsers (HTTPS).
A total of up to 999 AccessManager can be networked
to a system of over 15,000 doors.
In addition to the acoustic protection, a visual alarm is generated
by a coloured flash that can be seen from afar.
The connection is made via an RJ45 patch cable to the Kentix system socket.
The administration takes place centrally via the integrated web server.
The Smart Relay communicates via a bus connection
with the IP wall reader.
conventional DIN Euro profile locks.
Various RFID media in MIFARE® DESFire® technology are available as keys.
Operation is intuitive thanks to clear LED signalling.
In addition, it offers numerous practical functions such as
time switching/day release or continuous engagement.
and distribution cabinets. Battery operation reduces installation to a minimum.
The lock can be adapted to almost any IT rack using adapters.
and gate drives or lifts.
Locking authorisations can be issued from a central location
and reached at exposed, remote locations.
Ceret glurutis Tarkin.
or alternatively via PIN entry.
Two-factor authentication is also possible.
All measured values are collected in a web-based interface.
Independent thresholds for alarming can be defined
for each measured value.
based on the highest standards of electrical engineering.
The SmartPDU is used for calibrated and approved current measurements
according to EN50470-3 (MID) for cost accurate customer billing.
Ideal for measuring rack PDU, UPS, air conditioning systems or building services equipment.
The Inline Meter is also suitable for large data centers with hundreds of racks.
Available for 16 A and 32 A (1- and 3-phase).
thermal image sensor for monitoring critical plant conditions,
early fire detection and people counting.