AlarmManager

AlarmManager

 640,00 940,00 zzgl. MwSt.

The central unit for monitoring, alarming and managing of the Kentix MultiSensors

  • Integrated LTE Modem
  • Monitored threats: up to 19
  • Radio – Ethernet
  • E-Mail (SSL) – SNMP Alarm
  • Up to 100 MultiSensors
  • Web-Server – App –  Cloud

SKU: N/A Category:

The AlarmManager – The central Kentix alarm and management unit

The information of the MultiSensors are managed by the AlarmManager. The AlarmManager is installed in the server room or rack, and forwards all alarms and error messages to the responsible persons. The configuration is done with a comfortable web interface. All alarms and system messages are stored in the internal logbook.

The AlarmManager-BASIC can handle up to 200 wireless operating MultiSensors and KeyPads. The AlarmManager-PRO supports up to 500 MultiSensors and KeyPads. Here also network enabled sensors can be managed. Up to 1.000 user accounts can be created.

Overview of functions

  • Up to 100 MultiSensors connectable
  • Monitors up to 19 threats
  • Free PC-App for Windows, MacOS or Linux
  • Integrated web-server with intuitive user interface
  • Free smartphone APP (Android, iOS)
  • Full SNMP Support (MIB)
  • SMS gateway service for network-management-systems (e.g. PRTG, Nagios)
  • Alerting by E-Mail (SSL), LTE (SMS) or SNMP-Trap
  • Server Live-Check Monitoring
  • SNMP-Trap to SMS gateway function
  • IP camera trigger
  • VDS2465 protocol for connection to alarm operation center (first responder)

sms-e-mail snmp zigbee lan cloud

gsm-inside http app  buzzer

Applications

  • Condition monitoring of IT- and server-rooms, data-center and infrastructure
  • Long term Datalogging with chart view and CSV/XML export
  • Fault detection
  • Air monitoring of IT rooms and racks
  • Integration into Network Monitoring Systems
  • Monitoring of remote sites

thermo   

 vibration ext-in-out

The dashboard – Current state of the system at a glance

You can check the current state of the entire system on the dashboard. When an alarm has occurred, you will see at a glance where the alarm has gone off and what kind of alarm it is. The alarm zone table shows which areas are armed or disarmed and whether there is a trespassing alarm in the respective zone.

The AlarmManager saves the last two months of the measured climate data – temperature, humidity and dew point – of all connected MultiSensors. These can be viewed in a graph either on a daily, weekly or monthly basis.

MultiSensor settings – Who will receive alarms and when?

In the ControlCenter, up to 100 users can be defined for the operation and alarming via the Kentix system. You can choose different authorizations for different users which will determine the way a user can operate the system, which alarm zones they can arm/disarm and if and how they will receive alarms.

The configuration of the MultiSensors determines when an alarm is sent. In the setting for “Sensors – devices” all MultiSensors that are connected to the system are being managed. Here you can determine for each measurement value when an alarm will be triggered. Each MultiSensor is identified by a unique name and assigned to an alarm zone so that you can see directly where the alarm occurred.

Content of delivery

  • 1x AlarmManager-BASIC or -PRO respectively
  • Mounting bracket
  • Power supply
Number of MultiSensorMax 100 pc MultiSensor-RF / -LAN / -RACK
Number of KeyPadMax 100 pc KeyPad connectable
Internal Buzzer85dB, 2.3kHz
Ext. alarm inputs1 x alarm input (Armed-Active, Always-Active), 1 x external arm/disarm, both for external potential-free contacts
Ext. relay outputs2 x relay with alt. contact (Armed-Active, Always-Active); max. contact power: 125VAC/60VA, 60VDC/25W
Internal temper sensor3-axis vibration-sensor (adjustable)
LEDRUN (yellow), LTE (yellow), ALARM (red), ARMED (red)
RadioZigBee® 2,4GHz ISM Band +3dBm output power, IEEE802.15.4, encryption AES 128 Bit
LAN10/100Mbit
Integrated GSM ModemQuad Band (LTE/GPRS) 850/900/1800/1900MHz, integrated SIM card holder
Power supply10-32VAC/DC power consumption ca 2W
Integrated UPS4 minutes up time by internal high capacitor. Control of external power supply.
Kentix System-Port2 pc. RJ45, for external plug´n play modules (KIO1, KIO2, KPS,…)
ChassisMaterial: PSSize: 130 x 90 x 45 mm (5.11 x 3.54 x 1.77 in), Weight approx. 300g (0.662 lbs), Color: High-White, Carbon-Black
Environmental conditionsTemperature 0 – 45°C / 32 – 113°F; Humidity 5-95%, not condensing
TypesKAM-BASIC-B = Chassis carbon black, KAM-BASIC-W = Chassis high white
Content of deliveryPlug power supply 100-230VAC/24VDC, 12Watt2 pc of antennas (ZigBee, LTE), PowerAdapter, mounting bracket and material
AccessoriesLeakage sensor (KLS02P), External antennas with cable
ApprovalsCE

You may also like…

  • KMS-LAN-B-angle

    MultiSensor-RF

     395,00 zzgl. MwSt.

    All-in-one MultiSensor with ZigBee radio for easy networking with AlarmManager

    • Integrated sensors: 9
    • Monitored threats: up to 20
    • Wireless (ZigBee®)
    • Connection to AlarmManager
    • Environmental monitoring
    • Integrated USV
  • KMS-LAN-B-angle

    MultiSensor-LAN

     475,00 zzgl. MwSt.

    The all-rounder: Network enabled IT monitoring and data logging with just one device

    • Integrated sensors: 8
    • Monitored threats: up to 19
    • Stand alone - Web server
    • E-mail - SNMP alarm
    • Room monitoring
    • Power over Ethernet
  • KMS-LAN-B-angle

    MultiSensor-LAN-RF

     540,00 zzgl. MwSt.

    MultiSensor-LAN with repeater for easy monitoring of distributed IT-rooms with one AlarmManager

    • Integrated sensors: 8
    • Monitored threats: up to 20
    • Wireless - LAN repeater
    • E-mail - SNMP alarm
    • Environmental monitoring
    • Power over Ethernet
All prices are exclusive of VAT. Shipping costs will be charged. Our offer is for commercial customers only! Find your system partner in your area with our Partner List.