1.350,00 exclusive of taxes

Full monitoring solution with instant LTE alerting, expandable for distributed IT rooms

  • Up to 500 MultiSensors
  • Monitored threats: up to 37
  • Web server – App – Kentix360 Cloud
  • SMS – E-mail – SNMP
  • Up to 1.000 alarm receivers
  • Room monitoring up to 10.000m² / 100.000sqft

SKU: KSS-PRO Category:

Physical IT security with LTE alerting and 360° monitoring

With the StarterSet-PRO you will get a complete package for quick entry into the innovative monitoring technology by Kentix.

The StarterSet-PRO also all the components you need in order to monitor a server room with sizes from 20sqm to up to 10.000 sqm. With the included AlarmManager-PRO, the system can immediately be upgraded with network-compatible MultiSensors.

We recommend starting each new project with a StarterSet.

Overview of the functions

  • Up to 500 MultiSensors
  • Monitors up to 37 threats
  • Configuration via integrated web server
  • Integrated web-server with intuitive user interface
  • Free smartphone APP (Android, iOS)
  • SNMP-V2 Support (MIB)
  • SMS gateway service for network-management-systems (e.g. PRTG, Nagios)
  • Alerting by E-Mail (SSL), LTE (SMS) or SNMP-Trap
  • Server Live-Check Monitoring
  • IP camera recording

sms-e-mail snmp zigbee lan gsm-inside

app cloud  buzzer


  • Condition monitoring of IT- and server-rooms, data-center and infastructure
  • Datalogging over months
  • Fault detection
  • Air monitoring of IT rooms and racks
  • Integration into Network Monitoring Systems
  • Monitoring of remote sites


 vibration ext-in-out

The dashboard – Current state of the system at a glance

You can check the current state of the entire system on the dashboard. When an alarm has occurred, you will see at a glance where the alarm has gone off and what kind of alarm it is. The alarm zone table shows which areas are armed or disarmed and whether there is a trespassing alarm in the respective zone.

The AlarmManager saves the measured climate data – temperature, humidity and dew point – of all connected MultiSensors. These can be viewed in a graph either on a daily, weekly or monthly basis.

MultiSensor settings – Who will receive alarms and when?

In the ControlCenter, up to 1.000 users can be defined for the operation and alarming via the Kentix system. You can choose different authorizations for different users which will determine the way a user can operate the system, which alarm zones they can arm/disarm and if and how they will receive alarms.

The configuration of the MultiSensors determines when an alarm is sent. In the setting for “Sensors – devices” all MultiSensors that are connected to the system are being managed. Here you can determine for each measurement value when an alarm will be triggered. Each MultiSensor is identified by a unique name and assigned to an alarm zone so that you can see directly where the alarm occurred.

Kentix360 – The security central for your coat pocket

With the integrated Cloud solution Kentix360 you always have the security state of your system at hand. As the IT administrator you will be informed about all possible threats, thanks to the app even via smartphone or tablet. This way, you can react as quickly as possible and possibly to prevent damages before they occur.  Kentix360 also allows you to arm or disarm alarm zones remotely. Moreover, it reminds you to do routine check ups of the system and regularly scans all system components for functionality.

Content of delivery

  • 1x AlarmManager-PRO with mounting brackets
  • 1x MultiSensor-RF
  • 1x MultiSensor-DOOR
  • 1x Modular cable 10m
  • 1x Patch cable 3m
Connectable devicesBuilt-in web-server (HTTP/HTTPS)
AlarmingBuilt-in LTE module for network-redundant alarm messages, e-mail, SNMP
ControllingVia integrated webserver, smartphone APP for iOS and Android
System sizeManagement and control for up to 100 MultiSensor-RF/-LAN/-RACK
SNMPSNMP V2 (Read), SNMP Traps
User ManagementUp to 100 user accounts
Server monitoringPING or TCP port check for up to 50 servers
Online ConnectionKentix360 Cloud usable at any time
ExpandabilityIntegration of more MultiSensors or other monitoring devices such as LeakageSensor or Sounder possible any time

You may also like…

  • Sounder for Kentix Systemport

     249,00 exclusive of taxes

    Scares intruders away: Kentix Sounder for indoor or outdoor use

    • Very loud alarming noise
    • Red flashing LED light
    • Prevention of burglary
    • Protection class IP65
    • Plug’n’Play connection to an AlarmManager or MultiSensor
  • LeakageSensor

     185,00 exclusive of taxes

    Reliably detects water and fluid leaks. Connects to AlarmManager or MultiSensor-RF/-LAN.

    • Plug'n'Play connection to an AlarmManager or MultiSensor-LAN/-RF
    • Connectable via a standard patch cable
    • Continuously measures conductibility
    • No external power supply required
    • Cascadable up to 5 times
  • KMS-LAN-B-angle


     540,00 exclusive of taxes

    MultiSensor-LAN with repeater for easy monitoring of distributed IT-rooms with one AlarmManager

    • Integrated sensors: 8
    • Monitored threats: up to 20
    • Wireless - LAN repeater
    • E-mail - SNMP alarm
    • Environmental monitoring
    • Power over Ethernet
  • KeyPad-Touch

     490,00 exclusive of taxes

    Say goodbye to false alarms! Easily arm/disarm alarm zones and log access with the KeyPad.

    • 12 button glass keypad
    • Wireless (ZigBee®)
    • Connects to AlarmManager
    • Integrated RFID reader 13.56MHz
    • Door opening function
    • Battery powered (approx. 2 years)
  • KMS-LAN-B-angle


     475,00 exclusive of taxes

    The all-rounder: Network enabled IT monitoring and data logging with just one device

    • Integrated sensors: 8
    • Monitored threats: up to 19
    • Stand alone - Web server
    • E-mail - SNMP alarm
    • Room monitoring
    • Power over Ethernet
All prices are exclusive of VAT. Shipping costs will be charged. Our offer is for commercial customers only! Find your system partner in your area with our Partner List.
Go to Top