CLIMATE-MONITORING: Temperature - Humidity - Dewpoint
EARLY FIRE DETECTION: Firedetection starting from 10ppm carbon monoxide (CO)
ACCESS & INTRUSION: Access control combined with burglary alarm
LEAKAGE DETECTION: Message from flooding or tube leaks
Kentix in a hospital environment offers uninterrupted monitoring of the entire IT infrastructure and all critical systems.
Over 50% of IT system failures are caused by technical failure or are due to human error. System and data recovery requires an average of 4 hours and causes high costs.
Early detection and the direct reporting of threats is essential to avoid costly recovery processes. The use of a monitoring system for critical threats such as temperature, humidity, dew point, fire, power, movement and more, is part of the basic equipment of every IT environment – whether in a small server room, a data center or in a distributed infrastructure.
Physical hazards may arise in adjoining or supply rooms and thus also threaten your IT infrastructure.
360° round view for a safe hospital operation
The Kentix MultiSensor® technology monitors all important physical threats in rooms, racks and infrastructure with only a few devices. The different status and alarm values are provided via SNMP and can be integrated into a network monitoring system very easily using the SNMP Management Infomation Base (MIB). Kentix devices support all major monitoring systems, SCADA and DCIM (Data Center Infrastructure Management) solutions. Further information from external systems (air conditioning systems, UPS, generators, electrical systems, and more) can be concentrated and monitored with Kentix.
Would you like more information and find out how Kentix solutions also fit your application? Just contact us!
No more individual systems for better cost-efficiency
No matter how small or large the application is – Kentix solutions integrate all critical systems, but require very few system components for a complete monitoring. This saves costs – on the investment and during operation.
Intrusion detection system
Early fire detection
Reporting – Documentation
Fulfill Compliance regulations with Kentix
Application Health Care: Find out how you can fulfill Compliance regulations with Kentix solutions and how it helps you secure personal data.
The AlarmManager combines all information that the MultiSensors convey. The AlarmManager is installed in the server room and forwards all alarm and fault messages to the responsible persons.
The configuration is done with a comfortable PC app via LAN. All system messages are stored in the internal log memory.
The MultiSensor-RACK can be operated either as a stand-alone solution or in combination with an AlarmManager-PRO (or StarterSet-PRO).
The MultiSensor-RACK monitors all critical threats in the IT rack and additionally analyzes current and voltage via the integrated PDU.
The integrated web server ensures an intuitive operation and configuration.
Very compact MultiSensor for the climate monitoring of IT racks. The MultiSensor-RACK-MINI is operated in combination with an AlarmManager (or StarterSet).
The collected sensor data are transmitted via (ZigBee®) radio to the AlarmManager. The sensor is battery operated with a battery that runs for up to 4 years.
We have sparked your interest, but you still need more information? Fill out the following form and make an appointment today. We will show you the solution in an online webinar and answer all your questions!