Kentix SmartPDUs are system components for the intelligent expansion of your rack infrastructure. All important sensors and interfaces for future-proof operation are already integrated.
- 24xC13 and 6xC19 IEC sockets IEC-Lock lockable (IEC60320)
- protection 16A per group (C-type)
- mains connection IEC60309 connector 32A (ROT) (L1/L2/L3/N/PE/6h)
- cable connection H07RN-F (6mm2)
- measurement with MID approval
- class B accuracy (EN50470-3 MID)
- three counting ranges
- AC/DC differential current measurement (RCM)
- climate control (Temp. Hum / Dew)
- Network connection RJ45 (PoE Ethernet)
- Frequency 45-54Hz (0.01Hz)
- Temperature range -10 to 50 ° C
- Power supply 230VAC
- Power consumption 22KVA
- Power consumption approx. 5W
- Size (LxWxH) 1770x78.1x62. 5mm
- protection class IP20
Power cords with locking
IEC-Lock power cable, IEC60320 C19/C13, 16A, 250VAC, BLACK
3m power supply cable BLACK with IEC60320 C19 to IEC60320 C20 plug, IEC-Lock interlock, cable: H05VV-F 3G1.5, suitable for devices of protection class I according to IEC61140 Nominal power 16A/250VAC at 50/60Hz, -25 to 70°C operating temperature range.
IEC-Lock power cable, IEC60320 C19/C13, 16A, 250VAC, RED
3m power supply cable RED with IEC60320 C19 to IEC60320 C20 plug, IEC-Lock interlock, cable: H05VV-F 3G1.5, suitable for devices of protection class I according to IEC61140 Nominal power 16A/250VAC at 50/60Hz, -25 to 70°C operating temperature range.
IEC-Lock power cable, IEC60320 C14/C13, 10A, 250VAC, BLACK
3m power supply cable BLACK with IEC60320 C13 to IEC60320 C14 plug, IEC-Lock interlock, cable: H05VV-F 3G1, suitable for devices of protection class I according to IEC61140 Nominal power 10A/250VAC at 50/60Hz, -25 to 70°C operating temperature range.
IEC-Lock power cable, IEC60320 C14/C13, 10A, 250VAC, RED
3m power supply cable RED with IEC60320 C13 to IEC60320 C14 plug, IEC-Lock interlock, cable: H05VV-F 3G1, suitable for devices of protection class I according to IEC61140 Nominal power 10A/250VAC at 50/60Hz, -25 to 70°C operating temperature range.
Accessories
Mounting spacer for Kentix SmartPDU with 40HE (round, alu)
Round mounting bracket made of aluminum for quick mounting of the Kentix SmartPDU with 40U via two suspension points on the back of the PDU. Scope of delivery: 2pc. round mounting brackets with 2pc. countersunk screws (M4)
DoorLock-RA4-IP Rack Handle (MIFARE® DESFire)
KentixONE
LAN (PoE)
RFID
- RFID & PIN
- LED: RED-GREEN
- Up to 16 Lifthandles/Ethernetport (PoE)
- Chassis: Metal-Plastic
IT cabinet handle (left turning) in robust metal-plastic design as folding lever handle. This means that the handle does not require a swivel range and enables ergonomic handling. The connection is made completely via patch cable. Up to 16 handles can be connected per Kentix SmartRelay. Any number of SmartRelays can be networked together. A reed contact can be connected to a distribution box to each IP rack handle to reliably monitor the closing and locking status of the rack door. The power supply is PoE and is therefore easily integrated into the UPS power supply.
A/B front foil set (BLUE/ROT) for 2 SmartPDU 40U
Self-adhesive film set for labelling the SmartPDU across all module areas (L1/L2/L3/TOP/A-B). Scope of delivery: 10 pieces of filmIMPORTANT! When ordering with SmartPDU, the foil set is cost-neutral and is fitted at the factory.
C/D front foil (ORANGE) for SmartPDU 40HE
Self-adhesive film set for labelling the supply path with ‘C’ and ‘D’.IMPORTANT! When ordering with SmartPDU, the foil set is cost-neutral and is fitted at the factory.
Measure and monitor power supply in IT/OT rack
The PDU reliably supplies power to devices in IT racks, monitors key parameters including differential current, and ensures environmental monitoring of the rack
Switching on/off IT devices in the rack
Remote power on/off of IT devices through the PDU provides convenient management and reduces downtime or service callsDelivery Contents
- 1 PDU 40U ready for connection
- Sticker set for power-feed A/B
- Mounting set