What do you want to secure?
Our Solution-Finder makes it easy for you to find the right products for your requirements. Simply select what you want to secure. You will be surprised how few products you need for this!
We have found suitable products for your requirements
Our products for your application
Dual SmartPDU 40U with 2x 24/C13 (IEC60320), 2x 32A (A+B) with RCM
KentixONE
LAN (PoE)
Sysport (TYPE B)
MID approved
- Calibrated dual current measurement (MID)
- RCM residual current measurement
- Temperature, humidity, dew point, vibration, early fire detection
- IEC Lock plug protection
- RFID rack locking system can be connected directly
Kentix SmartPDUs are system components for the intelligent expansion of your rack infrastructure. All important sensors and interfaces for future-proof operation are already integrated.
StarterSet SmartMonitoring with MultiSensors (Ethernet-BLE)
KentixONE
LAN (PoE)
Radio (BLE)
Battery
Sysport (TYPE A)
4G-Modem
Starter set for entry into Kentix SmartMonitoring technology for seamless room and building monitoring. Expandable at any time with SmartAccess, SmartVideo and SmartPDU devices. Already integrated KentixONE software via web server (HTTPS) and 4G modem for redundant SMS alarming.Monitoring of:Temperature, humidity, climate control, smoldering fire / fire / fire gases (CO), intrusion / unauthorized access, access to unauthorized sub-areas (racks/cabinets), line loss / cable defects, failure of active system components, failure of services (HTTP,SMTP,VPN etc.), defective equipment fans, mains voltage failure, UPS defect failure, UPS remaining runtime and capacity.Possibility to connect up to 250 MultiSensors via radio and LANIntegrated LTE modem with slot for SIM card SNMP for integration into monitoring systemsAlarming via E-MAIL (SSL), SMS or SNMP trap
DKK 14,134.00
excl. VAT
StarterSet SmartAccess with DoorLock-DC (Ethernet-BLE)
KentixONE
LAN (PoE)
Radio (BLE)
RFID
Sysport (TYPE A)
4G-Modem
- Up to 250 devices (LAN/FUNK)
- Detected threats: >40
- Web-Server (HTTPS) – SmartPhone App
- E-MAIL – PUSH - SMS - VDS2465
- LDAP - SNMP-V2/3 - REST-API - Webhooks
With the SmartAccess StarterSet, you get all the components you need to lay the foundation for a complete access system. The StarterSet already contains the basic components for the first networked door with wireless knob (BLE). AccessManager and doors can be networked with each other as required, so that small and large access systems can be realised in no time at all. Can be expanded at any time with SmartMonitoring, SmartVideo and SmartPDU. KentixONE software already integrated via web server (HTTPS) and 4G modem for redundant SMS alerting.Connection option for up to 250 LAN and wireless componentsIntegrated 4G modem with slot for SIM cardSNMP for integration into monitoring systemsAlerting via e-mail, PUSH, SMS or SNMP trapOrder the matching door cylinder according to the required length at the same time. Use the configurator for cylinders for this purpose.
SmartPDU 40U with 24/C13-6/C19 (IEC60320), 3-phase 32A with RCM
KentixONE
LAN (PoE)
Sysport (TYPE B)
MID approved
- Calibrated dual current measurement (MID)
- RCM residual current measurement
- Temperature, humidity, dew point, vibration, early fire detection
- IEC Lock plug protection
- RFID rack locking system can be connected directly
Kentix SmartPDUs are system components for the intelligent expansion of your rack infrastructure. All important sensors and interfaces for future-proof operation are already integrated.24xC13 and 6xC19 IEC sockets IEC-Lock lockable (IEC60320)protection 16A per group (C-type)mains connection IEC60309 connector 32A (ROT) (L1/L2/L3/N/PE/6h)cable connection H07RN-F (6mm2)measurement with MID approvalclass B accuracy (EN50470-3 MID)three counting rangesAC/DC differential current measurement (RCM)climate control (Temp. Hum / Dew)Network connection RJ45 (PoE Ethernet)Frequency 45-54Hz (0.01Hz)Temperature range -10 to 50 ° CPower supply 230VACPower consumption 22KVAPower consumption approx. 5WSize (LxWxH) 1770x78.1x62. 5mmprotection class IP20
SmartPDU 19"-3HE with 27/C13 (IEC60320), 3-phase 32A with RCM
KentixONE
LAN (PoE)
Sysport (TYPE B)
MID approved
- Calibrated dual current measurement (MID)
- RCM residual current measurement
- Temperature, humidity, dew point, vibration, early fire detection
- IEC Lock plug protection
- RFID rack locking system can be connected directly
Material/Color: Sheet metal/black (RAL9005) powder-coated, 27xC13 IEC sockets IEC-Lock lockable (IEC60320), protection 16A per group (C-type), mains connection IEC60309 connector 32A (RED) (L1-3/N/PE/6h), cable connection 3m H05RN-F (6mm2), measurement with MID approval, class B accuracy (EN50470-3 MID), three counting ranges, display illuminated, AC/DC differential current measurement (RCM), climate control (Temp. Hum / Dew), Network connection RJ45 (PoE Ethernet), Frequency 45-54Hz (0.01Hz), Temperature range 0 to 50°C, Power supply 230/400VAC, Power consumption 11KVA, Power consumption approx. 5W, Size (LxWxH) 483x132,5x88mm, protection class IP20, content of delivery: PDU 3HE ready for connection, mounting set
Dual SmartPDU 19"-2HE with 2x 8/C13 (IEC60320), 16A (A+B) with RCM
KentixONE
LAN (PoE)
Sysport (TYPE B)
MID approved
- Calibrated dual current measurement (MID)
- RCM residual current measurement
- Temperature, humidity, dew point, vibration, early fire detection
- IEC Lock plug protection
- RFID rack locking system can be connected directly
Dual SmartPDU with separate A+B feed as a system solution with integrated Kentix MultiSensor technology and 2 height units, RCM and calibrated current measurement. The SmartPDU can be easily managed centrally using the integrated KentixONE software. The electronics of the SmartPDU are supplied via PoE, i.e. in the event of a power failure, both the sensors and the management of the PDU are guaranteed by a UPS-buffered PoE switch. In addition, further digital inputs/outputs are available via the Kentix system port, as well as the option of connecting electronic RFID rack levers directly.Ideal for IT/OT applicationsThe Dual SmartPDU are two PDUs in one housing and are therefore particularly cost and space-saving. All the advantages of two separate PDUs with separate power supply and intelligent monitoring are retained.16xC13 IEC60320 IEC-Lock lockable socketsfuse protection 10A per group (C-type)mains connection 2xC20 (A+B) IEC plugmeasurement with MID approvalAccuracy class B (EN50470-3 MID)two counting ranges display illuminatedAC/DC differential current measurement (RCM)climate monitoring (Temp/Hum/Dew)2-factor early fire detection (ΔT/Tmax, VOC)frequency 45-54Hz (0.01Hz)temperature range 0 to 50°Cpower supply 230/400VACconnected load 4.6KVApower consumption approx. 5Wsize (LxWxH) 483x88x88mmprotection class IP20
DoorLock-WA6-IP compact network reader for surface mounting (MIFARE® DESFire)
KentixONE
LAN (PoE)
RFID
PoE-Splitter
- RFID & PIN, 2 factor auth.
- Arm/disarm buttons
- LED: RED-GREEN-YELLOW
- Integrated PoE Splitter 24VDC
- Protection class: IP66
The frame reader is suitable e.g. for electric door openers, electric locks, electric door and gate drives or elevators. Due to its compact design, the reader is especially suitable for use with narrow metal profiles. Two-factor authentication is also possible. The AccessManager SmartRelay (PoE) forms the central unit with network connection. Management takes place centrally through the integrated web server.
Base package DoorLock-DC (MIFARE® DESFire, BLE) as system basis
KentixONE
LAN (PoE)
Radio (BLE)
RFID
- With DoorLock-DC BASIC (IP55)
- AccessManager with LAN (PoE)
- Web-Server (HTTPS) – Smartphone App
- Up to 16 knobs/handles
- Radio range up to 20m
With the DoorLock basic package, you always receive a set consisting of AccessManager and door handle. Each basic package or the AccessManager it contains can manage up to 16 doors with DoorLock-DC (door knob) or DoorLock-LE (door handle). In conjunction with a SiteManager, any number of AccessManagers can be networked.
The Kentix AccessManager (wireless, BLE) is the control unit for wirelessly networked Kentix DoorLock components such as door knobs (DoorLock-DC) or door handles (DoorLock-LE).The AccessManager is network-compatible and is supplied with power via Power over Ethernet (PoE). The AccessManager can be operated as a master device or in a network with other AccessManagers. The KentixONE software is already integrated via the integrated web server (HTTPS). Configuration is carried out via a web browser and, depending on the operating mode, locally on the AccessManager itself or on a central instance such as the SiteManager. The AccessManager can be mounted on the wall, on the ceiling or in the suspended ceiling. The supplied antenna can be extended using an optional magnetic base holder with a 1 metre connection cable. This means that the AccessManager can be installed indoors and the aerial outdoors for flexible and secure installation.Order the appropriate door cylinder according to the required length at the same time. Use the configurator for cylinders.
DoorLock-WA2-IP network reader Flush-Mount (MIFARE® DESFire)
KentixONE
LAN (PoE)
RFID
PoE-Splitter
- RFID
- LED: RED-GREEN-YELLOW
- Integrated PoE Splitter 24VDC
- Protection class: IP20
StarterSet DoorLock-WA-IP wall reader with RFID reader unit for mounting in switch box (60mm) and standard 55x55mm mounting frame, Ethernet (10/100MBit) with PoE (Class 3), integrated web server with KentixONE (HTTPS), main satellite mode for networking further AccessManagers, operating temperature reader -30 to +70°C, 2 x relay 24VDC/1A, 2 x digital input, Expandable to a total of 2 readers, Scope of delivery: 1x wall reader (IP66), 1x network relay module (IP20), 1x RFID key fob, 1x 3m SlimLine cable.
DoorLock-RA4 Rack-Lift-Handle with PIN LEFT-TURN (MIFARE® DESFire)
KentixONE
LAN (PoE)
RFID
- RFID & PIN
- LED: RED-GREEN
- Up to 16 Lifthandles/Ethernetport (PoE)
- Chassis: Metal-Plastic
IT cabinet handle (left turning) in robust metal-plastic design as folding lever handle. This means that the handle does not require a swivel range and enables ergonomic handling. The connection is made completely via patch cable. Up to 16 handles can be connected per Kentix SmartRelay. Any number of SmartRelays can be networked together. A reed contact can be connected to a distribution box to each IP rack handle to reliably monitor the closing and locking status of the rack door. The power supply is PoE and is therefore easily integrated into the UPS power supply.
MultiSensor with Ethernet (PoE) and Thermal-Image
KentixONE
LAN (PoE)
Radio (BLE)
Sysport (TYPE A)
- Integrated sensors: 9
- Monitored threats: up to 20
- 4-factor early fire detection
- Web server (HTTPS)
- E-MAIL - SNMP-V2/3 - REST-API
- LAN-RADIO (BLE) repeater integrated
MultiSensor with integrated 1024px thermal-cam sensor for 4-factor early fire detection and extented environmental monitoring.Full software on board with integrated web server (HTTPS), standalone operation or connection to Kentix AlarmManager-PRODetection angle: 90°Integrated sensors with monitoring of: Temperature, humidity, dew point, smoldering fire (CO), air quality, air-pressure, motion, acceleration-vibration (G), two external dry-contacts.Alarm notification via e-mail, SNMP traps (V2/3), web-hooks (REsT-API) or via SiteManager SMS and PUSH.
DKK 5,035.00
excl. VAT
DoorLock-DC radio knob (MIFARE® DESFire®, BLE)
Radio (BLE)
RFID
Battery
- BLE radio (2.4GHz)
- Battery life approx. 4 years
- RFID reader (MIFARE® DESFire®)
- RFID - Smartphone - Smartwatch
The Kentix DoorLock-DC-Basic is a battery-operated, electronic knob cylinder with radio technology.
It can be easily installed using a Euro profile cylinder (optional) and is suitable for use in all standard DIN Euro profile locks. The wireless door knob therefore offers a cost-effective locking solution for both new buildings and existing properties.The knob cylinder is designed for locking and unlocking locks in building doors. Depending on the product variant, the knob cylinder can be used indoors and outdoors. RFID transponders with MIFARE®DESFire® are used as keys. Power is supplied by batteries (CR2), which can only be changed or removed with special authorisation.The electronic knob cylinder is wirelessly networked with a wireless AccessManager. Up to 16 DoorLock radio components can be taught into one AccessManager radio. Configuration is carried out via the integrated web server of the control centre.
DoorLock-WA4-IP outdoor (IP67) network reader (MIFARE® DESFire)
KentixONE
LAN (PoE)
RFID
PoE-Splitter
- RFID
- LED: RED-GREEN-YELLOW
- Integrated PoE Splitter 24VDC
- Protection class: IP67
StarterSet DoorLock-WA as IP wall reader in weatherproof design (IP67) with RFID reader unit, Ethernet (10/100MBit) with PoE (Class 3), integrated web server with KentixONE (HTTPS), main-satellite mode for networking additional AccessManagers, operating temperature reader -30 to +70°C, 2 x relay 24VDC/1A, 2 x digital input, expandable to a total of 2 readers, scope of delivery: 1x wall reader (IP67), 1x network relay module (IP20), 1x RFID key fob, 1x 3m SlimLine cable
DoorLock-WA3-IP network reader (MIFARE® DESFire)
KentixONE
LAN (PoE)
RFID
PoE-Splitter
- RFID & PIN, 2-factor auth.
- Arm/disarm buttons
- LED: RED-GREEN-YELLOW
- Integrated PoE Splitter 24VDC
- Protection class: IP54, Indoor/Outdoor
Base package consisting of RFID wall reader with illuminated touch PIN keypad and AccessManager (SmartRelay) with Ethernet and PoE (10/100MBit), integrated web server (HTTPS) mit KentixONE, main-satellite mode for networking additional AccessManagers, reader mounting in switch box or surface mount (optional), operating temperature -20°C to +60°C, protection class IP54/65, 2x relay 24VDC/1A, 2x digital input, expandable to a total of 2x RFID wall readers, scope of delivery: 1x wall reader with touch PIN keypad, 1x AccessManager (SmartRelay), 1x RFID key fob, 1x 3m SlimLine cable
Passive PDU 40U with 24/C13-6/C19 (IEC60320), 3-phase 32A
- IEC Lock connector protection
- Lockable circuit breakers
Passive Kentix PDU with 40U for the intelligent expansion of your rack infrastructure.24xC13 and 6xC19 IEC sockets IEC-Lock lockable (IEC60320)protection 10A / 16A per group (C-type)mains connection IEC60309 connector 32A (RED) (L1/L2/L3/N/PE/6h)cable connection 3m H05VV-F (6mm2)Temperature range -10 to 50 ° CPower supply 230/400VACmaximum load 17.9KVAPower consumption approx. 20W (full-load)Size (LxWxH) 1770x78.1x62. 5mmprotection class IP20
4MP Varifocal Lens Outdoor (IP66) Dome Network Camera
LAN (PoE)
IR-LED
Motor-Zoom
- 4MP sensor with 2688×1520px
- 2.5x built-in motorized zoom
- Super dynamic range 102dB
- IR LED integrated
- Color night vision (0.019 to 0.3 lx)
- H.265 smart encoding
- Corridor mode (90/270° image rotation
4MP sensor, 2688×1520 pixels image with up to 30fps, Built-in 2.5x motor zoom and motorized focus lens, Viewing angle H100°/V54°, Network 100Mbit (PoE) , Super dynamic range 102dB, Color night vision (0.019 to 0.3 lx), H.265 intelligent coding, Corridor mode (90 degree or 270 degree image rotation), Built-in IR LED, IP66 protection, NDDA compliant, ∅154x103mm, content of delivery: 5MP dome network camera (white).
4MP Varifocal Lens Outdoor (IP66) Bullet Network Camera
LAN (PoE)
IR-LED
Motor-Zoom
- 4MP sensor with 2688×1520px
- 2.5x built-in motorized zoom
- Super dynamic range 102dB
- IR LED integrated
- Color night vision (0.019 to 0.3 lx)
- H.265 smart encoding
- Corridor mode (90/270° image rotation)
4MP sensor, 2688×1520 pixels image with up to 30fps, Built-in 2.5x motor zoom and motorized focus lens, Viewing angle H100°/V54°, Network 100Mbit (PoE) , Super dynamic range 102dB, Color night vision (0.019 to 0.3 lx), H.265 intelligent coding, Corridor mode (90 degree or 270 degree image rotation), Built-in IR LED, IP66 protection, NDDA compliant, 262x112.5x112.5mm, content of delivery: 5MP bullet network camera (white)
MultiSensor-LAN with PoE (Black)
KentixONE
LAN (PoE)
Radio (BLE)
Sysport (TYPE A)
- Integrated sensors: 8
- Monitored threats: up to 19
- Web server (HTTPS)
- E-MAIL - SNMP-V2/3 - REST-API
- LAN-RADIO (BLE) repeater integrated
MultiSensor for comprehensive room monitoring of up to 20 hazards. Monitors an area of approx. 20-25m². Connection is via Ethernet with PoE (Class 1) and thus requires no further cabling.
Operation is possible as a stand-alone sensor with already integrated KentixONE software (HTTPS) or via a networked KentixONE system with AlarmManager or SiteManager. It is mounted on the ceiling using the supplied mounting bracket. Optionally, mounting in the IT rack is also possible with the 19" bracket (accessory).Integrated sensors: temperature, humidity, dew point, carbon monoxide sensor (CO), 360° PIR motion sensor, 3-axis G-sensor, digital input/outputs.Also ideal as an independent room sensor to complement network monitoring systems (PRTG, Nagios, CheckMK, etc) via SNMP-V2/3 or REST API. The sensor can also send alarm email in stand-alone mode.
DKK 3,916.00
excl. VAT
Digital I/O-Module with 16 digital inputs
LAN (PoE)
- 16 digital inputs (for dry contacts)
- connection of external alarm messages
- Integrated web server
- Ethernet 10/100MBit (PoE)
The I/O expansion module connects to an AlarmManager/SiteManager and is used to connect external alarm messages. The communication takes place via Ethernet. Thus, the module can be mounted at any location. The configuration is done in the KentixONE..16 digital inputs for dry-contacts (e.g. air-conditioning, UPS system, external sensors, etc.)
DoorLock-LE Door handle (MIFARE® DESFire®, BLE)
Radio (BLE)
RFID
Battery
- BLE radio (2.4GHz)
- Battery life approx. 5 years
- RFID reader (MIFARE® DESFire®)
- RFID - smartphone - smartwatch
The Kentix DoorLock-LE is a battery-operated electronic door handle with radio (BLE). The door handle is compatible with most European lock standards. It is available in different versions and is therefore suitable for use in all common doors, from timber, steel and aluminum to fire doors. Installation is very simple and no special tools are required. Operation is intuitive thanks to clear LED signaling. It also offers numerous practical functions such as timers / daily releases or permanent engagement. The electronics are fully integrated in the handle. RFID transponder carriers with MIFARE®DESFire® can be used as keys.The electronic door handle is wirelessly networked with a wireless AccessManager. Up to 16 DoorLock radio components can be taught into one AccessManager radio. Configuration is carried out via the integrated web server or a SiteManager.
MultiSensor-ROOM (black) battery powered and wireless
Radio (BLE)
Battery
- Integrated sensors: 6
- Monitored threats: up to 15
- Wireless (BLE)
- Battery (approx. 4 years)
Wireless MultiSensor for ceiling mounting and monitoring of rooms and areas up to approx. 25m².
The MultiSensor-ROOM is battery operated and has a long battery life of up to 4 years. It is connected to a MultiSensor LAN via radio (BLE).Integrated sensors for: Temperature, humidity, dew point, early fire detection, motion, vibration/shock.
DoorLock-RA radio cabinet lock (MIFARE® DESFire®, 868MHz)
Radio (868MHz)
RFID
Battery
- Connection with AccessManager radio (868MHz)
- Battery life up to 8 years
- Button with LED RED/GREEN
- Different locking levers available
- Locking bolt 14 mm
The wireless cabinet lock offers a simple locking solution for converting data, technical and distribution cabinets. Battery operation reduces installation to a minimum. A lithium AA battery is used as the battery and enables runtimes of up to eight years or 100,000 operations. The battery is mechanically secured against removal (special tool). The lock is supplied with different locking levers and can thus be adapted to almost any distributor.
Alarm sounder for in-/outdoor installation
Sysport (TYPE A)
- Sound alarm
- Red flash LED
- Protection class IP65
- Plug'n'Play connection
The alarm siren can be installed inside and outside the building. It is a combination signal transmitter and a decisive component of a fully functioning alarm chain. In the event of an alarm, the siren generates a very loud signal tone of up to 110 dB sound pressure. In addition to the acoustic protection, a visual alarm is triggered by a colored flashing light (flash frequency: 1 Hz) that is visible from far away. Due to the robust ABS housing, the compact alarm can be used outdoors. The connection is made via an RJ45 patch cable (10m included) directly to the Kentix systemport (TYPE A).
Leakage sensor for detecting water and flooding
Sysport (TYPE A)
- Plug 'n Play connection
- Sensor sensitivity adjustable
- 5-fold cascadable
- Monitored for cable break
The leakage sensor is used to detect water leakage on the floor and is connected to an SiteManager or MultiSensor directly to the Kentix system port (TYP A). It continuously detects conductivity via multiple electrodes directly on the housing or additionally via a sensor cable.The sensor has an integrated point sensor with adjustable sensitivity. The versions with sensor cable (KLS03-ROPE-10/20) detect water in addition to the point sensor over the entire sensor cable length (10/20m). The sensitivity of the point sensor is 1-2ml water, the sensitivity of the sensor cable is approx. 10ml water over 20cm cable length.The leakage sensor can be cascaded up to 5 times and is therefore also suitable for large rooms.
Temperature sensor IP66 (-50 to + 100 ° C) for KIO7017
- Temperature sensor Pt1000 class B
- 3 selectable temperature ranges
- Protection class IP66
- Sleeve sensor with 2m sensor cable
PT1000 class B outdoor temperature sensor with active current (4-20mA) and voltage output (0-10V).Three selectable temperature ranges (-50°C ... + 50°C; 0°C ... + 50°C; 0°C ... +100°C).Housing protection IP66.Power supply 24VDC/4mA.For connection to I/O module KIO7017.
MultiSensor-DOOR (Black) wireless and battery powered
Radio (BLE)
Battery
- Integrated sensors: 6
- Monitored threats: up to 10
- Wireless (BLE)
- Battery (approx. 4 years)
Ultra-compact MultiSensor for intrusion and status monitoring of doors and windows including ambient monitoring of temperature, humidity and dew point. The sensor is additionally equipped with a 3-axis G-sensor and detects vibration and position changes (sabotage detection, attempted break-in, glass breakage).The MultiSensor-DOOR replaces classic door contacts and can be mounted very easily by gluing or screwing it on. The supplied door/window magnet serves as a counterpart for secure opening detection.The MultiSensor-DOOR is battery operated and has a long battery life (up to four years). It is connected to an MultiSenor-LAN via radio (BLE).
1. Simple system solution
We make the choice easy for you: on the one hand, through the all-in-one Kentix MultiSensor technology, and on the other hand, through the simple integration into your IT environment. This means you can implement even complex requirements with just a few products.
2. Everything fits together
Most Kentix products require only one network connection with PoE. The rest works wirelessly. Kentix products have the software already integrated and can be networked without limits. Everything fits together
3. One software platform
Our solutions run securely "on-premise" at your site and are all based on one software platform, namely KentixONE. This means that the basic functionality is independent of cloud providers. Only our additional service KentixONE-GO for remote access via app and messaging runs as a cloud service.
