The I/O expansion module connects to an AlarmManager/SiteManager and is used to connect external alarm messages to KentixONE. The communication takes place via Ethernet. Thus, the module can be mounted at any location. The configuration is done in KentixONE.
8 digital inputs (e.g. air conditioning, UPS system, external sensors, etc.), 8 digital outputs for alarm signaling.
Extensions
slide 6 to 8 of 6
4MP Compact Outdoor (IP66) Dome Network Camera
LAN (PoE)
IR-LED
- 4MP sensor with 2688×1520px
- Compact chassis with 109mm
- Super dynamic range 102dB
- IR LED integrated
- Color night vision (0.019 to 0.3 lx)
- H.265 smart encoding
- Corridor mode (90/270° image rotation)
4MP sensor, 2688×1520 pixels image with up to 30fps, Viewing angle H100°/V54°, Network 100Mbit (PoE) , Super dynamic range 102dB, Color night vision (0.019 to 0.3 lx), H.265 intelligent coding, Corridor mode (90 degree or 270 degree image rotation), Built-in IR LED, IP66 protection, NDDA compliant, ∅109x62mm, contetn of delivery: 5MP dome network camera (white).
Digital I/O-Module with 16 digital inputs
LAN (PoE)
- 16 digital inputs (for dry contacts)
- connection of external alarm messages
- Integrated web server
- Ethernet 10/100MBit (PoE)
The I/O expansion module connects to an AlarmManager/SiteManager and is used to connect external alarm messages. The communication takes place via Ethernet. Thus, the module can be mounted at any location. The configuration is done in the KentixONE..16 digital inputs for dry-contacts (e.g. air-conditioning, UPS system, external sensors, etc.)
Leakage sensor for detecting water and flooding
Sysport (TYPE A)
- Plug 'n Play connection
- Sensor sensitivity adjustable
- 5-fold cascadable
- Monitored for cable break
The leakage sensor is used to detect water leakage on the floor and is connected to an SiteManager or MultiSensor directly to the Kentix system port (TYP A). It continuously detects conductivity via multiple electrodes directly on the housing or additionally via a sensor cable.The sensor has an integrated point sensor with adjustable sensitivity. The versions with sensor cable (KLS03-ROPE-10/20) detect water in addition to the point sensor over the entire sensor cable length (10/20m). The sensitivity of the point sensor is 1-2ml water, the sensitivity of the sensor cable is approx. 10ml water over 20cm cable length.The leakage sensor can be cascaded up to 5 times and is therefore also suitable for large rooms.
MultiSensor with Ethernet (PoE) and Thermal-Image
KentixONE
LAN (PoE)
Radio (BLE)
Sysport (TYPE A)
- Integrated sensors: 9
- Monitored threats: up to 20
- 4-factor early fire detection
- Web server (HTTPS)
- E-MAIL - SNMP-V2/3 - REST-API
- LAN-RADIO (BLE) repeater integrated
The MultiSensor-TI is the latest MultiSensor technology with integrated thermal imaging sensor for monitoring critical system conditions and for early fire detection. In addition to pure thermal monitoring, the sensor can also detect the movement of people. Compared to thermal imaging cameras, the sensor has the advantage that it works in compliance with data protection regulations and intelligently links several sensors for early fire detection. For early fire detection, this means that up to four factors (thermal image, CO, air quality, room temperature) are analysed for reliable detection.The MultiSensor monitors up to 20 threats and an area of up to approx. 40m² depending on the ceiling height. It is connected via Ethernet with PoE (Power over Ethernet) and therefore requires no additional cabling. Operation is possible as a stand-alone sensor with integrated KentixONE software (HTTPS) or via a networked KentixONE system with SiteManager. The sensor is mounted on the ceiling using the mounting bracket supplied. Mounting in an IT rack or on the wall with the 19’ bracket (accessory) is also possible as an option.Detection angle: 90° or 40° (depending on type)Integrated sensors for monitoring: Temperature, air humidity, dew point, smouldering fire (CO), air quality, air pressure, movement, acceleration/vibration (G), two external alarm contacts.Alarm notification via MultiSensor (stand-alone): E-mail, SNMP traps (V2/3), web hooks (REsT-API)Alarm notification via SiteManager (central): SMS, PUSH (app)
MultiSensor-DOOR (Black) wireless and battery powered
Radio (BLE)
Battery
- Integrated sensors: 6
- Monitored threats: up to 10
- Wireless (BLE)
- Battery (approx. 4 years)
Ultra-compact MultiSensor for intrusion and status monitoring of doors and windows including ambient monitoring of temperature, humidity and dew point. The sensor is additionally equipped with a 3-axis G-sensor and detects vibration and position changes (sabotage detection, attempted break-in, glass breakage).The MultiSensor-DOOR replaces classic door contacts and can be mounted very easily by gluing or screwing it on. The supplied door/window magnet serves as a counterpart for secure opening detection.The MultiSensor-DOOR is battery operated and has a long battery life (up to four years). It is connected to an MultiSenor-LAN via radio (BLE).
MultiSensor-LAN with PoE (Black)
KentixONE
LAN (PoE)
Radio (BLE)
Sysport (TYPE A)
- Integrated sensors: 8
- Monitored threats: up to 19
- Web server (HTTPS)
- E-MAIL - SNMP-V2/3 - REST-API
- LAN-RADIO (BLE) repeater integrated
Network-compatible MultiSensor for complete room monitoring of up to 19 threats. Monitors an area of approx. 20-25m². The connection is made via Ethernet with PoE (Class 1) and therefore requires no additional cabling. Operation is possible as a stand-alone sensor with integrated KentixONE software (HTTPS) or via a networked KentixONE system with SiteManager. The sensor is mounted on the ceiling using the mounting bracket supplied. Optionally, it can also be mounted in an IT rack or on the wall using the 19’ bracket (accessory).Also ideal as an independent room sensor to supplement network monitoring systems (PRTG, Nagios, CheckMK, etc.) via SNMP-V2/3 or REST-API. The sensor can also send alarm e-mails in stand-alone mode.Integrated sensors: temperature, humidity, dew point, carbon monoxide sensor (CO), 360° PIR motion sensor, 3-axis G-sensor, digital input/outputs.
Accessories
slide 1 to 2 of 2
Magnet Door-Contact, white, 2m cable
Door contact with open cable. Contact: NO, cable lenght 2 m, color: white, Size: (L x H x W) 11 x 12 x 48 mm, Delivery: Magnet-contact with mounting material
Industrial Gigabit UPoE splitter for DIN-rail
Power non-PoE devices up to 100 m (328 feet) away from the PSE. Splits a Gigabit PoE signal into separate power and data sources. A single Ultra PoE source can power up to two devices. Adjustable output voltage supports 12V, 16V, 24V or 48V devices. For best performance, we recommend using with UPoE switches. Save installation and equipment costs. IEEE 802.3bt compatible, NDAA/TAA compliant, Scope of delivery: splitter, quick installation guide, detachable terminal block, DIN rail and wall mounting accessories.Application example: Use as a power supply for an IO module for analog measured value sensors (ART: KIO7017) and connected temperature sensors (KESAN-01). Instead of an external power supply unit, the PoE splitter provides the necessary supply voltage for the external temperature sensors. This has the advantage that only one supply line is required for the network and power supply (PoE) and a UPS supply can also be implemented very easily via the PoE switch.
Translated with DeepL.com (free version)
Monitor and control cold room and refrigerator temperature
Continuous monitoring of cold rooms and refrigerators to ensure the integrity of food and medicines.
Monitor UPS for status and fault
UPS system monitoring ensures the functionality of the uninterruptible power supply and protects against data loss during power outages.
Monitor generator for condition and malfunction
Continuous monitoring of generators ensures that they are ready to go when needed and provide smooth operation.
Monitor fuse for status and fault
Condition monitoring of circuit breakers to react quickly to fuse failures and ensure service quality
Monitor power quality and phase condition
The monitoring of phases, voltages and currents of the power grid is used to detect irregularities and to prevent failures in advance.Delivery Contents
- 1 IO module
- 1 DIN rail adapter
- 1 SlimLine cable 3m
Specifications
I/O module with 8 inputs/8 outputs – DATASHEET
| Function | Expansion module for up to 8 external alarm or system messages and 8 switching outputs (open collector). Communication is via Ethernet, so the module can be mounted anywhere. The configuration is done in the KentixONE software interface. The module offers easy IP configuration and testing of the inputs without additional software via the integrated web server. |
| Connection possibility | AlarmManager or SiteManager |
| Configuration | Integr. Web server (HTTP) Default IP: 192.168.255.1 (Admin/Admin) |
| Protocols | Modbus communication via IP port: 502 (default) |
| Security | ID, password and IP filter |
| Connection terminals | Plug-in screw terminals for cables up to 1mm² |
| Enteränge | Digital inputs for voltage switching ON: +10-50VDC, OFF: +4DC Input impedance: 10kOHM, overvoltage protection 70VDC |
| Outputänge | Open collector outputs 10-40VDC Load capacity 650mA (up to 1.1A overcurrent protection) Overvoltage protection 47VDC |
| Alarm output assignmentänge | DO1-DO8: Assignment via KentixONE interface |
| Insulation | Ethernet 1.5kVDC, I/O 3.7kVrms |
| Environment | Operating temperature 0°C to +45°C, Rel. Humidity 10-90% |
| Network | LAN 10/100 Base-TX |
| Power supply | External power supply 12-30VDC, 4.5Watt |
| Housing | 72 x 123 x 35 mm (DIN rail mounting) |
| Scope of delivery | KIO7052, 3m patch cable, power connection cable, manual |
| Approval | CE |