Dual SmartPDU with separate A+B feed as a system solution with integrated Kentix MultiSensor technology and 2 height units, RCM and calibrated current measurement. The SmartPDU can be easily managed centrally using the integrated KentixONE software. The electronics of the SmartPDU are supplied via PoE, i.e. in the event of a power failure, both the sensors and the management of the PDU are guaranteed by a UPS-buffered PoE switch. In addition, further digital inputs/outputs are available via the Kentix system port, as well as the option of connecting electronic RFID rack levers directly.
Ideal for IT/OT applications
The Dual SmartPDU are two PDUs in one housing and are therefore particularly cost and space-saving. All the advantages of two separate PDUs with separate power supply and intelligent monitoring are retained.
- 16xC13 IEC60320 IEC-Lock lockable sockets
- fuse protection 10A per group (C-type)
- mains connection 2xC20 (A+B) IEC plug
- measurement with MID approval
- Accuracy class B (EN50470-3 MID)
- two counting ranges
- display illuminated
- AC/DC differential current measurement (RCM)
- climate monitoring (Temp/Hum/Dew)
- 2-factor early fire detection (ΔT/Tmax, VOC)
- frequency 45-54Hz (0.01Hz)
- temperature range 0 to 50°C
- power supply 230/400VAC
- connected load 4.6KVA
- power consumption approx. 5W
- size (LxWxH) 483x88x88mm
- protection class IP20
Power cords with locking
slide 7 to 9 of 4
IEC-Lock power cable, IEC60320 C19/C13, 16A, 250VAC, RED
3m power supply cable RED with IEC60320 C19 to IEC60320 C20 plug, IEC-Lock interlock, cable: H05VV-F 3G1.5, suitable for devices of protection class I according to IEC61140 Nominal power 16A/250VAC at 50/60Hz, -25 to 70°C operating temperature range.
IEC-Lock power cable, IEC60320 C19/C13, 16A, 250VAC, BLACK
3m power supply cable BLACK with IEC60320 C19 to IEC60320 C20 plug, IEC-Lock interlock, cable: H05VV-F 3G1.5, suitable for devices of protection class I according to IEC61140 Nominal power 16A/250VAC at 50/60Hz, -25 to 70°C operating temperature range.
IEC-Lock power cable, IEC60320 C14/C13, 10A, 250VAC, RED
3m power supply cable RED with IEC60320 C13 to IEC60320 C14 plug, IEC-Lock interlock, cable: H05VV-F 3G1, suitable for devices of protection class I according to IEC61140 Nominal power 10A/250VAC at 50/60Hz, -25 to 70°C operating temperature range.
IEC-Lock power cable, IEC60320 C14/C13, 10A, 250VAC, BLACK
3m power supply cable BLACK with IEC60320 C13 to IEC60320 C14 plug, IEC-Lock interlock, cable: H05VV-F 3G1, suitable for devices of protection class I according to IEC61140 Nominal power 10A/250VAC at 50/60Hz, -25 to 70°C operating temperature range.
Accessories
slide 1 of 1
DoorLock-RA4-IP Rack Handle (MIFARE® DESFire)
KentixONE
LAN (PoE)
RFID
- RFID & PIN
- LED: RED-GREEN
- Up to 16 Lifthandles/Ethernetport (PoE)
- Chassis: Metal-Plastic
IT cabinet handle (left turning) in robust metal-plastic design as folding lever handle. This means that the handle does not require a swivel range and enables ergonomic handling. The connection is made completely via patch cable. Up to 16 handles can be connected per Kentix SmartRelay. Any number of SmartRelays can be networked together. A reed contact can be connected to a distribution box to each IP rack handle to reliably monitor the closing and locking status of the rack door. The power supply is PoE and is therefore easily integrated into the UPS power supply.
Monitor UPS for status and fault
UPS system monitoring ensures the functionality of the uninterruptible power supply and protects against data loss during power outages.
Measure and monitor power supply in IT/OT rack
The PDU reliably supplies power to devices in IT racks, monitors key parameters including differential current, and ensures environmental monitoring of the rackDelivery Contents
- PDU 2HE ready for connection
Note! Please order the correct power cords
Specifications
Dual SmartPDU 2U, 2×10/16A (up to 2x 3.6kVA) – Datasheet
| Types | KPMDU-RC-1600C13C19-2–16-H | KPMDU-NC-1600C13C19-1–16-H |
|---|---|---|
| Rated power, voltage | 2×2.3kVA, 230V | 1×2.3kVA, 230V |
| Connector plug | 2x C20 IEC socket (16A) on rear panel | 1x C20 IEC socket (16A) on rear panel |
| Connection cable | Connection cable must be ordered separately | Connection cable must be ordered separately |
| Sockets C13 (IEC60320) | 16 (2x 8) C13 with A+B supply | 16 (2x 8) C13 with A+B supply |
| Interlock | IEC-LOCK for C13 | |
| Fuse/circuit breaker | 2x 10A C-type, interlocked | |
| Current measurement (calibrated) | Integrated, calibrated current measurement, accuracy Class B (MID, EN 50470-3) Minimum current 250mA | |
| Residual current measurement (RCM)OPTIONAL | Integrated AC/DC sensitive residual current measurement in accordance with IEC 60664-1 ±300mA/100mA (RMS), accuracy <0.2mA Frequency range DC 0..2kHz | / |
| Connectivity | Ethernet (10/100MBit), PoE Class 3 | |
| Kentix system socket (type B) | RJ45 with Kentix-specific assignment for system extensions 2 x digital input (e.g. door contacts, leakage detectors, external alarms) 1 x system BUS | |
| Communication and security | HTTPS (certificate), integrated web server, ReSt-API Port security 802.1x Protocols: SNMP V2/3 (GET, TRAP), NTP, SMTP, DHCP, MODBUS-TCP | |
| Management | Main satellite management via KentixONE | |
| Measurement/communication objects | Voltage (V) L1/L2/total Current (A) L1/L2/total Consumption (kWh) L1/L2/total Active power (W) L1/L2/total apparent power (VA) L1/L2/total Reactive power (VAR) L1/L2/total Active factor (cos phi) Frequency (Hz) Phase monitoring L1/L2/ Residual current AC Residual current DC Fuse status L1/L2/ Temperature (°C) Relative humidity (%) Dew point (°C) Vibration (G) Air quality VOC (AIQ Index) | |
| Display (LCD) | Illuminated LCD display (power, current, voltage, consumption) | |
| Optical signaling | LED with RED/GREEN (operation, alarm/error status) | |
| Acoustic signaling | Signal generator with 80dB, 2.3kHz (alarm/fault conditions) | |
| Factory state | Button for factory reset in side panel | |
| Housing | Sheet metal, powder-coated RAL9005 Protection class 1, protection rating IP20 | |
| Size | 443 x 88 x 88 mm (WxHxD) | |
| Weight | approx. 3,0kg | |
| Environmental conditions | 0°C to 60°C, humidity 5-95% Storage temperature: -20°C to 60°C | |
| Certification | CE (2014/30/EC, 2014/35/EC, 2011/65/EU) | |
| Electrical safety | DGUV V3 testing, VDE 0105-100 | |
| Marking | Serial number (barcode) | |