SmartMonitoring
Kentix MultiSensor® technology monitors up to 37 hazards easily and efficiently. Real-time information and redundant reporting paths ensure fast notifications. Integrable IT-based solution at no additional cost complies with ISO 27001.
StarterSet SmartMonitoring with MultiSensors (Ethernet-BLE)
KentixONE
LAN (PoE)
Radio (BLE)
Battery
Sysport (TYPE A)
4G-Modem
Starter set for entry into Kentix SmartMonitoring technology for seamless room and building monitoring. Expandable at any time with SmartAccess, SmartVideo and SmartPDU devices. Already integrated KentixONE software via web server (HTTPS) and 4G modem for redundant SMS alarming.Monitoring of:Temperature, humidity, climate control, smoldering fire / fire / fire gases (CO), intrusion / unauthorized access, access to unauthorized sub-areas (racks/cabinets), line loss / cable defects, failure of active system components, failure of services (HTTP,SMTP,VPN etc.), defective equipment fans, mains voltage failure, UPS defect failure, UPS remaining runtime and capacity.Possibility to connect up to 250 MultiSensors via radio and LANIntegrated LTE modem with slot for SIM card SNMP for integration into monitoring systemsAlarming via E-MAIL (SSL), SMS or SNMP trap
NOK 22,110.00
excl. VAT
SiteManager as a hardware appliance for the individual project start
Appliance / Docker
KentixONE
Sysport (TYPE A)
4G-Modem
- Up to 250 devices (LAN/RADIO)
- Detected threats: >40
- Web-Server (HTTPS) – Smartphone App
- E-MAIL – PUSH - SMS - VDS2465
- LDAP - SNMP-V2/3 - REST-API - WEBHOOKS
High-Performance ARM Quad Core Appliance with KentixONEHigh-performance ARM Quad Core Appliance with KentixONE, Fanless, 2x Ethernet 1GBit/100Mbit (LAN1/2), 2x Kentix system port, SD card slot, nano SIM card slot, integrated 4G modem, dual power supply, Power 24VDC/10Watt, Temperature range 0-55°C, Mounting in 19"-1U or 35mm DIN rail, Size (HxWxD) 111x25x76mm, Scope of delivery: SiteManager, 19" mounting bracket, 4G magnetic base antenna (2m cable length), plug-in power supply 100-230VAC/24VDC, C14 power supply adapter, KentixONE-SIM Karte (DE/AT/CH)
MultiSensor with Ethernet (PoE) and Thermal-Image
KentixONE
LAN (PoE)
Radio (BLE)
Sysport (TYPE A)
- Integrated sensors: 9
- Monitored threats: up to 20
- 4-factor early fire detection
- Web server (HTTPS)
- E-MAIL - SNMP-V2/3 - REST-API
- LAN-RADIO (BLE) repeater integrated
The MultiSensor-TI is the latest MultiSensor technology with integrated thermal imaging sensor for monitoring critical system conditions and for early fire detection. In addition to pure thermal monitoring, the sensor can also detect the movement of people. Compared to thermal imaging cameras, the sensor has the advantage that it works in compliance with data protection regulations and intelligently links several sensors for early fire detection. For early fire detection, this means that up to four factors (thermal image, CO, air quality, room temperature) are analysed for reliable detection.The MultiSensor monitors up to 20 threats and an area of up to approx. 40m² depending on the ceiling height. It is connected via Ethernet with PoE (Power over Ethernet) and therefore requires no additional cabling. Operation is possible as a stand-alone sensor with integrated KentixONE software (HTTPS) or via a networked KentixONE system with SiteManager. The sensor is mounted on the ceiling using the mounting bracket supplied. Mounting in an IT rack or on the wall with the 19’ bracket (accessory) is also possible as an option.Detection angle: 90° or 40° (depending on type)Integrated sensors for monitoring: Temperature, air humidity, dew point, smouldering fire (CO), air quality, air pressure, movement, acceleration/vibration (G), two external alarm contacts.Alarm notification via MultiSensor (stand-alone): E-mail, SNMP traps (V2/3), web hooks (REsT-API)Alarm notification via SiteManager (central): SMS, PUSH (app)
Sale
NOK 7,876.00
excl. VAT
MultiSensor-LAN with PoE (Black)
KentixONE
LAN (PoE)
Radio (BLE)
Sysport (TYPE A)
- Integrated sensors: 8
- Monitored threats: up to 19
- Web server (HTTPS)
- E-MAIL - SNMP-V2/3 - REST-API
- LAN-RADIO (BLE) repeater integrated
Network-compatible MultiSensor for complete room monitoring of up to 19 threats. Monitors an area of approx. 20-25m². The connection is made via Ethernet with PoE (Class 1) and therefore requires no additional cabling. Operation is possible as a stand-alone sensor with integrated KentixONE software (HTTPS) or via a networked KentixONE system with SiteManager. The sensor is mounted on the ceiling using the mounting bracket supplied. Optionally, it can also be mounted in an IT rack or on the wall using the 19’ bracket (accessory).Also ideal as an independent room sensor to supplement network monitoring systems (PRTG, Nagios, CheckMK, etc.) via SNMP-V2/3 or REST-API. The sensor can also send alarm e-mails in stand-alone mode.Integrated sensors: temperature, humidity, dew point, carbon monoxide sensor (CO), 360° PIR motion sensor, 3-axis G-sensor, digital input/outputs.
NOK 6,126.00
excl. VAT
Digital I/O-Module with 16 digital inputs
LAN (PoE)
- 16 digital inputs (for dry contacts)
- connection of external alarm messages
- Integrated web server
- Ethernet 10/100MBit (PoE)
The I/O expansion module connects to an AlarmManager/SiteManager and is used to connect external alarm messages. The communication takes place via Ethernet. Thus, the module can be mounted at any location. The configuration is done in the KentixONE..16 digital inputs for dry-contacts (e.g. air-conditioning, UPS system, external sensors, etc.)
MultiSensor-ROOM (black) battery powered and wireless
Radio (BLE)
Battery
- Integrated sensors: 6
- Monitored threats: up to 15
- Wireless (BLE)
- Battery (approx. 4 years)
Wireless MultiSensor for ceiling mounting and monitoring of rooms and areas up to approx. 25m².
The MultiSensor-ROOM is battery operated and has a long battery life of up to 4 years. It is connected to a MultiSensor LAN via radio (BLE).Integrated sensors for: Temperature, humidity, dew point, early fire detection, motion, vibration/shock.
Leakage sensor for detecting water and flooding
Sysport (TYPE A)
- Plug 'n Play connection
- Sensor sensitivity adjustable
- 5-fold cascadable
- Monitored for cable break
The leakage sensor is used to detect water leakage on the floor and is connected to an SiteManager or MultiSensor directly to the Kentix system port (TYP A). It continuously detects conductivity via multiple electrodes directly on the housing or additionally via a sensor cable.The sensor has an integrated point sensor with adjustable sensitivity. The versions with sensor cable (KLS03-ROPE-10/20) detect water in addition to the point sensor over the entire sensor cable length (10/20m). The sensitivity of the point sensor is 1-2ml water, the sensitivity of the sensor cable is approx. 10ml water over 20cm cable length.The leakage sensor can be cascaded up to 5 times and is therefore also suitable for large rooms.
Temperature sensor IP66 (-50 to + 100 ° C) for KIO7017
- Temperature sensor Pt1000 class B
- 3 selectable temperature ranges
- Protection class IP66
- Integrated sensor
PT1000 class B outdoor temperature sensor with active current (4-20mA) and voltage output (0-10V).Three selectable temperature ranges (-50°C ... + 50°C; 0°C ... + 50°C; 0°C ... +100°C).Housing protection IP66.Power supply 24VDC/4mA.For connection to I/O module KIO7017.
MultiSensor-DOOR (Black) wireless and battery powered
Radio (BLE)
Battery
- Integrated sensors: 6
- Monitored threats: up to 10
- Wireless (BLE)
- Battery (approx. 4 years)
Ultra-compact MultiSensor for intrusion and status monitoring of doors and windows including ambient monitoring of temperature, humidity and dew point. The sensor is additionally equipped with a 3-axis G-sensor and detects vibration and position changes (sabotage detection, attempted break-in, glass breakage).The MultiSensor-DOOR replaces classic door contacts and can be mounted very easily by gluing or screwing it on. The supplied door/window magnet serves as a counterpart for secure opening detection.The MultiSensor-DOOR is battery operated and has a long battery life (up to four years). It is connected to an MultiSenor-LAN via radio (BLE).
I/O relais adapter for Kentix sytem port (Type A)
Sysport (TYPE A)
- I/O adapter
- 2 digital inputs
- 2 relay outputs
I/O adapter for connection to Kentix system port (Type A) for connecting external IN/ OUTPUTS via the system socket.2x digital input, 2x relay output
Magnet Door-Contact, white, 2m cable
Door contact with open cable. Contact: NO, cable lenght 2 m, color: white, Size: (L x H x W) 11 x 12 x 48 mm, Delivery: Magnet-contact with mounting material