IT cabinet handle (left turning) in robust metal-plastic design as folding lever handle. This means that the handle does not require a swivel range and enables ergonomic handling. The connection is made completely via patch cable. Up to 16 handles can be connected per Kentix SmartRelay. Any number of SmartRelays can be networked together. A reed contact can be connected to a distribution box to each IP rack handle to reliably monitor the closing and locking status of the rack door. The power supply is PoE and is therefore easily integrated into the UPS power supply.
Accessories
Accessories
slide 6 to 8 of 6
Cabinet lock adapter for KXC-RA4 for RITTAL© TS8 rack system, door with flat front
- Rack lever adapter for RA4
- RITTAL IT racks with TS8 handle
- Flat door
Rack lever adapter for cabinet lock TYPE: KXC-RA4. Can be used for IT cabinets from the manufacturer Rittal GmbH & Co. KG of TYPE: TS, TS IT, SE, PC, IW for door with flat front, door hinge left/right can be used.ATTENTION: Only available in combination with cabinet lever lock KXC-RA4.Exact type testing required before ordering!
Cabinet lock adapter for KXC-RA4 for RITTAL© TS8 rack system, door with slanted edge
- Rack lever adapter for KXC-RA4
- RITTAL IT racks with TS8 handle
- Door with slanted edge
Rack lever adapter for cabinet lock TYPE: KXC-RA4. Can be used for IT cabinets from the manufacturer Rittal GmbH & Co. KG of TYPE: TS, TS IT, SE, PC, IW for door with design bevel, door hinge left/right can be used.ATTENTION: Only available in combination with cabinet lever lock KXC-RA4.Exact type testing required before ordering!
Distribution box set for IT rack locking system KXC-RA4 with magnetic contacts
Sysport (TYPE A)
- Distribution box for rack levers and door contacts in the rack
- For connection to AccessManager (ART: KXP-2-RS)
- 2x rack levers can be connected (ART: KXC-RA4-xxx-x)
- 2x door contacts can be connected (ART: KDC1-W)
Distribution box with door contacts for cabling and distribution in the rack to two Kentix rack readers (ART: KXC-RA4) and two door contacts. For connection to an AccessManager (ART: KXP-2-RS) via patch/network cable (RJ45)Size (WxLxH): 39x68.5x23.5mm
Slim-Line Patchcable black 5m (CAT 6)
Cable for power supply of MultiSensor and AlarmManager.Suitable as a network cable (CAT6, UTP).For connection with adapter KIO1/2/3.
Slim-Line Patchcable black 5m (CAT 6)
Cable for power supply of MultiSensor and AlarmManager.Suitable as a network cable (CAT6, UTP).For connection with adapter KIO1/2/3.
Cabinet lock adapter for KXC-RA4 for RITTAL© VX rack system
- Rack lever adapter for RA4
- RITTAL VX rack series
- left/right usage
Rack lever adapter for cabinet lock TYPE: KXC-RA4. Can be used for IT cabinets from the manufacturer Rittal GmbH & Co. KG of TYPE: VX for door with/without flat front, door hinge left/right can be used.ATTENTION: Only available in combination with cabinet lever lock KXC-RA4.Exact type testing required before ordering!
Cabinet lock adapter for KXC-RA4 for RITTAL© TS8 rack system, door with flat front
- Rack lever adapter for RA4
- RITTAL IT racks with TS8 handle
- Flat door
Rack lever adapter for cabinet lock TYPE: KXC-RA4. Can be used for IT cabinets from the manufacturer Rittal GmbH & Co. KG of TYPE: TS, TS IT, SE, PC, IW for door with flat front, door hinge left/right can be used.ATTENTION: Only available in combination with cabinet lever lock KXC-RA4.Exact type testing required before ordering!
Cabinet lock adapter for KXC-RA4 for RITTAL© TS8 rack system, door with slanted edge
- Rack lever adapter for KXC-RA4
- RITTAL IT racks with TS8 handle
- Door with slanted edge
Rack lever adapter for cabinet lock TYPE: KXC-RA4. Can be used for IT cabinets from the manufacturer Rittal GmbH & Co. KG of TYPE: TS, TS IT, SE, PC, IW for door with design bevel, door hinge left/right can be used.ATTENTION: Only available in combination with cabinet lever lock KXC-RA4.Exact type testing required before ordering!
Distribution box set for IT rack locking system KXC-RA4 with magnetic contacts
Sysport (TYPE A)
- Distribution box for rack levers and door contacts in the rack
- For connection to AccessManager (ART: KXP-2-RS)
- 2x rack levers can be connected (ART: KXC-RA4-xxx-x)
- 2x door contacts can be connected (ART: KDC1-W)
Distribution box with door contacts for cabling and distribution in the rack to two Kentix rack readers (ART: KXC-RA4) and two door contacts. For connection to an AccessManager (ART: KXP-2-RS) via patch/network cable (RJ45)Size (WxLxH): 39x68.5x23.5mm
Slim-Line Patchcable black 5m (CAT 6)
Cable for power supply of MultiSensor and AlarmManager.Suitable as a network cable (CAT6, UTP).For connection with adapter KIO1/2/3.
Slim-Line Patchcable black 5m (CAT 6)
Cable for power supply of MultiSensor and AlarmManager.Suitable as a network cable (CAT6, UTP).For connection with adapter KIO1/2/3.
Cabinet lock adapter for KXC-RA4 for RITTAL© VX rack system
- Rack lever adapter for RA4
- RITTAL VX rack series
- left/right usage
Rack lever adapter for cabinet lock TYPE: KXC-RA4. Can be used for IT cabinets from the manufacturer Rittal GmbH & Co. KG of TYPE: VX for door with/without flat front, door hinge left/right can be used.ATTENTION: Only available in combination with cabinet lever lock KXC-RA4.Exact type testing required before ordering!
Cabinet lock adapter for KXC-RA4 for RITTAL© TS8 rack system, door with flat front
- Rack lever adapter for RA4
- RITTAL IT racks with TS8 handle
- Flat door
Rack lever adapter for cabinet lock TYPE: KXC-RA4. Can be used for IT cabinets from the manufacturer Rittal GmbH & Co. KG of TYPE: TS, TS IT, SE, PC, IW for door with flat front, door hinge left/right can be used.ATTENTION: Only available in combination with cabinet lever lock KXC-RA4.Exact type testing required before ordering!
Cabinet lock adapter for KXC-RA4 for RITTAL© TS8 rack system, door with slanted edge
- Rack lever adapter for KXC-RA4
- RITTAL IT racks with TS8 handle
- Door with slanted edge
Rack lever adapter for cabinet lock TYPE: KXC-RA4. Can be used for IT cabinets from the manufacturer Rittal GmbH & Co. KG of TYPE: TS, TS IT, SE, PC, IW for door with design bevel, door hinge left/right can be used.ATTENTION: Only available in combination with cabinet lever lock KXC-RA4.Exact type testing required before ordering!
Distribution box set for IT rack locking system KXC-RA4 with magnetic contacts
Sysport (TYPE A)
- Distribution box for rack levers and door contacts in the rack
- For connection to AccessManager (ART: KXP-2-RS)
- 2x rack levers can be connected (ART: KXC-RA4-xxx-x)
- 2x door contacts can be connected (ART: KDC1-W)
Distribution box with door contacts for cabling and distribution in the rack to two Kentix rack readers (ART: KXC-RA4) and two door contacts. For connection to an AccessManager (ART: KXP-2-RS) via patch/network cable (RJ45)Size (WxLxH): 39x68.5x23.5mm
Slim-Line Patchcable black 5m (CAT 6)
Cable for power supply of MultiSensor and AlarmManager.Suitable as a network cable (CAT6, UTP).For connection with adapter KIO1/2/3.
Access control for IT/OT rack with monitoring
Wired access control for IT/OT racks protects sensitive technology and data from unauthorized access.Downloads
Delivery Contents
- 1 Rack lever with RFID reader and PIN (ART:KXC-RA4-IP1-x)
- 1 AccessManager with PoE and RJ45 adapter (ART: KXP-2-RS)
- 1 Mounting bracket (DIN rail)
- 2 SlimLine cable 3m
Specifications
DoorLock-RA4 – DATASHEET
Function | Mechatronic rack handle as lifting lever |
Usage | Lifting lever for data and server cabinets |
Connection possibility | DoorLock AccessManager KXP-2-RS (up to 16 rack levers) SmartPDU (2 rack levers) |
Networking | 16 rack levers on AccessManager in BUS topology, standard patch cable CAT5/6/7 (< AWG25) |
RFID Reader 13.56MHz | MIFARE® DESFire® EV1/2 MIFARE® Classic Legic advant ATC (UID) ISO14443 (UID) Version with multi-card reader additionally: LEGIC advant ATCLEGIC card-in-card solutions AFSLEGIC prime MIM Texas Instruments Tag-ItEM Microelectronics EM4035 Infineon my-d NFC Forum Day 2/3/4 Types NXP Ultralight Sony Felica (plain text) Inside Contactless (UID)HID iClass (UID) |
PIN keypad | Touch PIN keyboard with 4 keys |
Lever status | Sensor for detecting the lever position (open/closed) |
Signal generator | Acoustic signal generator 70dB, 2.3kHz |
LED | RED, GREEN |
Connection | RJ45 on rear, standard patch cable CAT5 |
Door contact | RJ45 connection via adapter box in connection cable |
Power supply | Via AccessManager (PoE) or SmartPDU (system port) Redundant external supply with power supply 24VDC/1A |
Dimensions | 250 x 34 x 31mm (LxWxH) |
Material | Plastic, metal casting |
Emergency opening | Possible via special tool |
Environmental conditions | Temperature 0°C to 60°C for indoor use |
Protection class | IP30 |
Variants | KXC-RA4-IP1-R/L (StarterSet with AccessManager) KXC-RA4-IP2-R/L (extension for StarterSet or SmartPDU) Version with multi-card reader: KXC-RA4MR-IP1-R/L (StarterSet with AccessManager) KXC-RA4MR-IP2-R/L (extension for StarterSet or SmartPDU) |
Scope of delivery | Rack lever, SlimLine cable 3m |
Accessories | Distribution box (KXC-RA4-DB-BUS) Distribution box PDU (KXC-RA4-DB-PDU)Distribution box, set with door contacts (KXC-RA4-DB-BUS-SET)Adapter for various manufacturers: Rittal (TS, VX), Vertiv, Modulan Further adapter variants at: https://shop.kentix.com/ |
Exams | CE |