MIFARE® DESFire® and NFC capable reader/writer 13.56MHz, supported transponders: ISO14443A: MIFARE® Classic 1k & 4k, Mini, MIFARE® DESFire® (Kentix Standard), LEGIC Advant, dimensions: 88mm x 56mm x 18mm, power supply 5V ± 10% via USB, temperature: -25°C to +80°C (-13°F to 176°F), driver: USB 2. 0 Win7, Win 8, XP, Win10, MacOS, works as keyboard driver, output format: DECIMAL, scope of delivery: desktop reader, USB cable 1m
Is required once for every DoorLock system with radio. Contains special coding for managing the locking cylinders and is the “master key” for the system.
Mastercard duplicate for Kenntic DoorLock system. Contains special coding for the management of lock cylinders. Is the "master key" for the plant. Content of delivery: 1pc. System card, 1pc. Master card, 2pc. Service cards, 2pc. Keyfob, 1pc. Battery dismounting tool. IMPORTANT! Can only be ordered in conjunction with an initial master-card set (KXC-PS1) or as a replacement. When ordering a replacement, verification of the end customer with master-key is required (PDF form).
Low-power adapter for DoorLock-DC BASIC electronic knob. Required for emergency opening and battery replacement when the battery is completely empty. Content of delivery: Battery replacement tool, 9V block battery, dismounting tool for front cover
Cabinet and furniture lock adapter for radio knob (KXC-KN1 or KXC-KN2) with square 8mm. Suitable for installation in filing cabinets, tool lockers or office furniture. The knob is simply attached.
Cylinder housing milled 5mm on A-side.Can only be ordered together with article KXC-50/80/140-AABB.IMPORTANT! This article is excluded from exchange.
Unmanaged PoE extender with 2*10/100M RJ45 ports and 1*10/100M RJ45 uplink port. Port 1-2 supports the IEEE 802.3 af/at PoE standard. The maximum PoE power of a port is 30 W and the maximum PoE output power is 24 W. As a PoE power supply device, it can automatically detect and identify devices that comply with the standards and supply them with power via network cables and supply PoE end devices such as MultiSensors, AccessManagers, IP cameras with power via network cables and extends the twisted pair PoE transmission up to 200 metres. Scope of delivery: PoE Extender
Magnetic base holder with 1m connection cable for screwing on the amplifier antenna ART: KXP-ANT-EXT2.
- Rack Lever Adapter for KXC-RA4
- VERTIV VR Racks
- Single door
Rack adapter for cabinet lift-handle TYPE: KXC-RA4 suitable for IT-racks from Type: VR, MIR2 of manufacturer VERTIV-KNUERR. ATTENTION: Only available in combination with cabinet lock KXC-RA4. Exact type testing before ordering necessary.
- Rack lever adapter for KXC-RA4
- RITTAL IT racks with TS8 handle
- Door with slanted edge
Rack lever adapter for cabinet lock TYPE: KXC-RA4. Can be used for IT cabinets from the manufacturer Rittal GmbH & Co. KG of TYPE: TS, TS IT, SE, PC, IW for door with design bevel, door hinge left/right can be used.ATTENTION: Only available in combination with cabinet lever lock KXC-RA4.Exact type testing required before ordering!
- Rack lever adapter for RA4
- RITTAL IT racks with TS8 handle
- Flat door
Rack lever adapter for cabinet lock TYPE: KXC-RA4. Can be used for IT cabinets from the manufacturer Rittal GmbH & Co. KG of TYPE: TS, TS IT, SE, PC, IW for door with flat front, door hinge left/right can be used.ATTENTION: Only available in combination with cabinet lever lock KXC-RA4.Exact type testing required before ordering!
- Rack lever adapter for RA4
- RITTAL VX rack series
- left/right usage
Rack lever adapter for cabinet lock TYPE: KXC-RA4. Can be used for IT cabinets from the manufacturer Rittal GmbH & Co. KG of TYPE: VX for door with/without flat front, door hinge left/right can be used.ATTENTION: Only available in combination with cabinet lever lock KXC-RA4-L.Exact type testing required before ordering!
Surface-mounted cover for wall mounted reader KXC-WA3-IP1/2 colored in RAL 9006 (IP54).
Mechanical knob for profile cylinder Swiss KXC-80CH/140CH-AABB. Diameter 29mm
Mechanical dummy core as a knob replacement for mechn. knob suitable for standard profile cylinder KXC-80/140-AABB for KXC-KN1/2
Amplifier antenna, bendable to improve the transmission-reception signal, amplification up to +8dBi (2.4GHz) with screw connection SMA (male), suitable for DoorLock AccessPoint KXP-16-x (868MHz) and KXP-16-x-BLE (2.4GHz)IMPORTANT! Will be delivered as standard antenna for all KXP-16-x-x from 10/2023.
- Magnet mounting bracket
Magnetic holder for mounting a Kentix device on metallic surfaces, e.g. in a 19" IT rack. Suitable for KMS-LAN, KMS-LAN-RF, KMS- RF, KMS-RF-BAT, KMS-TI.
- MIFARE®DESFire®
- 8k EV2
- Key fob
- Kentix security application
Kentix RFID transponder key fobs 8kbyte Speicher EV2 - 70pF, are based on MIFARE®DESFire® technology (13.56MHz). By default, the tokens are written with a special Kentix security application.
- MIFARE®DESFire®
- EM4200
- RFID dual check cards
- Kentix security application
Kentix RFID DualTransponder check cards are based on MIFARE® DESFire® 4k and EM4200. By default, the tokens are written with a special Kentix security application+.
- MIFARE®DESFire®
- EM4200
- RFID dual key fob
- Kentix security application
Kentix RFID DualTransponder key fobs are based on MIFARE® DESFire® 4k and EM4200. By default, the tokens are written with a special Kentix security application.
Mechanical knob for standard profile cylinder KXC-80/140-AABB. Diameter 29mm
- MIFARE®DESFire®
- RFID key fob Ø36mm
- Kentix security application
- Without print
Kentix transponder key fobs are based on MIFARE®DESFire® technology (13.56MHz) type EV3 with 4kB memory. By default, the tokens are written with a special Kentix security application.
Tested and recommended Lithium batteries for electronic knob DoorLock-DC. Content of delivery: 2pieces CR2 (3V/850mAh)(Pictures and manufacturer may vary)
- MIFARE®DESFire®
- RFID check card (86x54mm)
- Kentix security application
- Without print
Kentix RFID transponder check card 2k EV2 - 70pF, based on MIFARE®DESFire® technology. By default, the tokens are written with a special Kentix security application, but can also be written with their own security application according to standard.
Spare battery for cabinet lock KXC-RA2 (only 868MHz), Lithium-Thionyl chloride battery 3.6V, Size: AA, capacity: 2.600 mAh, Weight: 10g, temperature-range: 0-80°C
- MIFARE®DESFire®
- RFID adhesive transponders
- Kentix security application
- Without print
Kentix adhesive transponders are based on MIFARE®DESFire® technology (13.56MHz) of type EV1 with 4kB memory. By default, the tokens are written with a special Kentix security application.
- Reading range of up to 9 meters
- Battery-free operation
- RAIN compliant
- TagMaster SecureMarkID®
- Tamper-proof
RFID transponder check card as self-adhesive ID tag for permanent attachment to the windshield, supports TagMaster SecureMarkID® and Barcode 128C marked. Size: 106,4 x 28,6 mm (4,2 x 1,1 Inch), thickness 0,55 mm (0,022 Inch).
Dismounting tool for easy dismounting of the DoorLock-PRO knob shell (ART-NO: KXC-KN4) for battery change.
Tested and recommended Lithium batteries for electronic door knob DoorLock-LE. Content of delivery: 1 piece CR 123 (3V/1550mAh)(Pictures and manufacturer may vary)
Notöffnungsset für mechn. Notöffnung des KXC-RA4 Rackhebel im Falle von Stromausfall oder Defekt, Lieferumfang: Notöffnungswerkzeug, 2 Stück Frontfolie
MULTI-SPRAY-OIL is a resin- and silicone-free high-performance product based on selected aromatic-free base oils and additives. The multifunctional care and maintenance spray is characterized by its special economic efficiency. Can be used as a lubricant, corrosion protection, creep oil, moisture displacer and cleaner all in one. Follow the care instructions for the individual products! Quantity: 50ml
KXC-RA Locking lever for rack cabinet lock in variant 3, Length: 38.8mm, 9.5mm offset/crank.
KXC-RA Locking lever for rack cabinet lock in variant 2, Length: 32.8mm, 5.2mm offset/crank.
- Locking lever for RA2
- other variants available
KXC-RA Locking lever for rack cabinet lock in variant 1Length: 40,0mmno offset/crank
DoorLock-BASIC battery replacement tool for easy removal of the knob housing (ART-NR: KXC-KN1/2) for battery replacement
Battery dismounting tool for easy unlocking of the cabinet lock (KXC-RA1) battery compartment.