StarterSet SmartMonitoring with MultiSensors (Ethernet-BLE)
KentixONE
LAN (PoE)
Radio (BLE)
Battery
Sysport (TYPE A)
4G-Modem
Starter set for entry into Kentix SmartMonitoring technology for seamless room and building monitoring. Expandable at any time with SmartAccess, SmartVideo and SmartPDU devices. Already integrated KentixONE software via web server (HTTPS) and 4G modem for redundant SMS alarming.
Monitoring of:
Temperature, humidity, climate control, smoldering fire / fire / fire gases (CO), intrusion / unauthorized access, access to unauthorized sub-areas (racks/cabinets), line loss / cable defects, failure of active system components, failure of services (HTTP,SMTP,VPN etc.), defective equipment fans, mains voltage failure, UPS defect failure, UPS remaining runtime and capacity.
Monitoring of:
Temperature, humidity, climate control, smoldering fire / fire / fire gases (CO), intrusion / unauthorized access, access to unauthorized sub-areas (racks/cabinets), line loss / cable defects, failure of active system components, failure of services (HTTP,SMTP,VPN etc.), defective equipment fans, mains voltage failure, UPS defect failure, UPS remaining runtime and capacity.
- Possibility to connect up to 250 MultiSensors via radio and LAN
- Integrated LTE modem with slot for SIM card
- SNMP for integration into monitoring systems
- Alarming via E-MAIL (SSL), SMS or SNMP trap
DoorLock-WA3-IP network reader (MIFARE® DESFire)
KentixONE
LAN (PoE)
RFID
PoE-Splitter
- RFID & PIN, 2-factor auth.
- Arm/disarm buttons
- LED: RED-GREEN-YELLOW
- Integrated PoE Splitter 24VDC
- Protection class: IP54, Indoor/Outdoor
Base package consisting of RFID wall reader with illuminated touch PIN keypad and AccessManager (SmartRelay) with Ethernet and PoE (10/100MBit), integrated web server (HTTPS) mit KentixONE, main-satellite mode for networking additional AccessManagers, reader mounting in switch box or surface mount (optional), operating temperature -20°C to +60°C, protection class IP54/65, 2x relay 24VDC/1A, 2x digital input, expandable to a total of 2x RFID wall readers, scope of delivery: 1x wall reader with touch PIN keypad, 1x AccessManager (SmartRelay), 1x RFID key fob, 1x 3m SlimLine cable
Base package DoorLock-DC (MIFARE® DESFire, BLE) as system basis
KentixONE
LAN (PoE)
Radio (BLE)
RFID
- With DoorLock-DC BASIC (IP55)
- AccessManager with LAN (PoE)
- Web-Server (HTTPS) – Smartphone App
- Up to 16 knobs/handles
- Radio range up to 20m
With the DoorLock basic package, you always receive a set consisting of AccessManager and door handle. Each basic package or the AccessManager it contains can manage up to 16 doors with DoorLock-DC (door knob) or DoorLock-LE (door handle). In conjunction with a SiteManager, any number of AccessManagers can be networked.
The Kentix AccessManager (wireless, BLE) is the control unit for wirelessly networked Kentix DoorLock components such as door knobs (DoorLock-DC) or door handles (DoorLock-LE).The AccessManager is network-compatible and is supplied with power via Power over Ethernet (PoE). The AccessManager can be operated as a master device or in a network with other AccessManagers. The KentixONE software is already integrated via the integrated web server (HTTPS). Configuration is carried out via a web browser and, depending on the operating mode, locally on the AccessManager itself or on a central instance such as the SiteManager. The AccessManager can be mounted on the wall, on the ceiling or in the suspended ceiling. The supplied antenna can be extended using an optional magnetic base holder with a 1 metre connection cable. This means that the AccessManager can be installed indoors and the aerial outdoors for flexible and secure installation.Order the appropriate door cylinder according to the required length at the same time. Use the configurator for cylinders.
MultiSensor with Ethernet (PoE) and Thermal-Image
KentixONE
LAN (PoE)
Radio (BLE)
Sysport (TYPE A)
- Integrated sensors: 9
- Monitored threats: up to 20
- 4-factor early fire detection
- Web server (HTTPS)
- E-MAIL - SNMP-V2/3 - REST-API
- LAN-RADIO (BLE) repeater integrated
MultiSensor with integrated 1024px thermal-cam sensor for 4-factor early fire detection and extented environmental monitoring.Full software on board with integrated web server (HTTPS), standalone operation or connection to Kentix AlarmManager-PRODetection angle: 90°Integrated sensors with monitoring of: Temperature, humidity, dew point, smoldering fire (CO), air quality, air-pressure, motion, acceleration-vibration (G), two external dry-contacts.Alarm notification via e-mail, SNMP traps (V2/3), web-hooks (REsT-API) or via SiteManager SMS and PUSH.
€675.00
excl. VAT
MultiSensor-LAN with PoE (Black)
KentixONE
LAN (PoE)
Radio (BLE)
Sysport (TYPE A)
- Integrated sensors: 8
- Monitored threats: up to 19
- Web server (HTTPS)
- E-MAIL - SNMP-V2/3 - REST-API
- LAN-RADIO (BLE) repeater integrated
MultiSensor for comprehensive room monitoring of up to 20 hazards. Monitors an area of approx. 20-25m². Connection is via Ethernet with PoE (Class 1) and thus requires no further cabling.
Operation is possible as a stand-alone sensor with already integrated KentixONE software (HTTPS) or via a networked KentixONE system with AlarmManager or SiteManager. It is mounted on the ceiling using the supplied mounting bracket. Optionally, mounting in the IT rack is also possible with the 19" bracket (accessory).Integrated sensors: temperature, humidity, dew point, carbon monoxide sensor (CO), 360° PIR motion sensor, 3-axis G-sensor, digital input/outputs.Also ideal as an independent room sensor to complement network monitoring systems (PRTG, Nagios, CheckMK, etc) via SNMP-V2/3 or REST API. The sensor can also send alarm email in stand-alone mode.
€525.00
excl. VAT
Digital I/O-Module with 16 digital inputs
LAN (PoE)
- 16 digital inputs (for dry contacts)
- connection of external alarm messages
- Integrated web server
- Ethernet 10/100MBit (PoE)
The I/O expansion module connects to an AlarmManager/SiteManager and is used to connect external alarm messages. The communication takes place via Ethernet. Thus, the module can be mounted at any location. The configuration is done in the KentixONE..16 digital inputs for dry-contacts (e.g. air-conditioning, UPS system, external sensors, etc.)
Leakage sensor for detecting water and flooding
Sysport (TYPE A)
- Plug 'n Play connection
- Sensor sensitivity adjustable
- 5-fold cascadable
- Monitored for cable break
The leakage sensor is used to detect water leakage on the floor and is connected to an SiteManager or MultiSensor directly to the Kentix system port (TYP A). It continuously detects conductivity via multiple electrodes directly on the housing or additionally via a sensor cable.The sensor has an integrated point sensor with adjustable sensitivity. The versions with sensor cable (KLS03-ROPE-10/20) detect water in addition to the point sensor over the entire sensor cable length (10/20m). The sensitivity of the point sensor is 1-2ml water, the sensitivity of the sensor cable is approx. 10ml water over 20cm cable length.The leakage sensor can be cascaded up to 5 times and is therefore also suitable for large rooms.
MultiSensor-DOOR (Black) wireless and battery powered
Radio (BLE)
Battery
- Integrated sensors: 6
- Monitored threats: up to 10
- Wireless (BLE)
- Battery (approx. 4 years)
Ultra-compact MultiSensor for intrusion and status monitoring of doors and windows including ambient monitoring of temperature, humidity and dew point. The sensor is additionally equipped with a 3-axis G-sensor and detects vibration and position changes (sabotage detection, attempted break-in, glass breakage).The MultiSensor-DOOR replaces classic door contacts and can be mounted very easily by gluing or screwing it on. The supplied door/window magnet serves as a counterpart for secure opening detection.The MultiSensor-DOOR is battery operated and has a long battery life (up to four years). It is connected to an MultiSenor-LAN via radio (BLE).
KentixONE Expert Training
Get started now: Become a certified KentixONE expert in just two days
In two days, get to know KentixONE from the ground up, the IoT-based security system that recognises over 40 physical threats and can be used to secure any company and any infrastructure in an all-round intelligent, predictive, smart and, above all, simple way.After the training course, you will have the expertise to install and commission KentixONE. You complete the training with a certificate. Kentix partners naturally retain their status and receive the certification.
Translated with DeepL.com (free version)
Contents
Kentix: Philosophy and portfolio
KentixONE as a complete system
Basics in SmartAccess, SmartMonitoring, SmartVideo:
Topology
Hardware
Installation, commissioning and maintenance
Software structure
Users, roles and authorizations
Parameterization and settings
Service and Support
Basics in SmartPDU
What do I need for the training?
We provide the equipment, you only need to bring your WiFi-enabled laptop - alternatively there is the possibility to connect a network cable to the laptop on site.
Short & sweet
Two days of classroom training at the training center at Kentix headquarters in Idar-Oberstein
Included: Coffee and soft drinks flat rate, snacks, 2x lunch, 1x dinner
The training takes place in small groups up to a maximum of 10 people
Accommodation and travel costs as well as other expenses are borne by the participants.
Our hotel recommendation in Idar-Oberstein:
Parkhotel Idar-Oberstein, Hauptstraße 185, 55743 Idar-Oberstein, bei Buchung Rabattcode "Kentix" nennen, www.parkhotel-idaroberstein.de
Diamant-Hotel, Tiefensteiner Str. 235, 55743 Idar-Oberstein, Zimmer ab 102 Euro, diamanthotel.de
Villa Horbach, Hauptstr. 264, 55743 Idar-Oberstein, Zimmer ab 139 Euro, villahorbach.com
Server room environment monitoring according to basic protection (ISO27001)
Constant monitoring of the server room for temperature, humidity and intruders to ensure the smooth operation of the IT infrastructure.
Ambient monitoring for storage rooms
Monitoring of climate conditions in storage rooms to ensure optimal storage conditions for sensitive goods.
Monitor office space for burglary, fire, climate
Comprehensive monitoring of the office for movement, temperature and air quality to ensure safety and comfort.
Monitor air conditioning and indoor climate
Monitoring of the air conditioning system ensures efficient performance and prevents malfunctions to optimize indoor climate and energy efficiency.
Monitor rooms for intrusion & movement
Detection of movements in rooms to safeguard and prevent security risks and losses.
Monitor temperature, humidity and dew point
Monitoring temperature, humidity and dew-point for optimal indoor conditions.
Detect water leakage in server room
Early detection of water leaks in the server room prevents potential damage to expensive IT infrastructure and data loss.
Detect water leakage from dishwasher
Water leakage monitoring for dishwashers protects against water damage and helps avoid unplanned repairs.
Detect water leakage on machine
Water leakage monitoring on machines is used to safeguard production processes and prevent expensive production downtime.
Detect water leakage from pipeline
Monitoring water leaks from pipes minimizes water damage and increases safety in buildings.
Monitor UPS for status and fault
UPS system monitoring ensures the functionality of the uninterruptible power supply and protects against data loss during power outages.
Monitor generator for condition and malfunction
Continuous monitoring of generators ensures that they are ready to go when needed and provide smooth operation.
Monitor fuse for status and fault
Condition monitoring of circuit breakers to react quickly to fuse failures and ensure service quality
Monitor power quality and phase condition
The monitoring of phases, voltages and currents of the power grid is used to detect irregularities and to prevent failures in advance.
Optical-acoustic alarming of plant conditions
Optical and acoustic alarm informs and warns on site about critical conditions or malfunctions
Scare away burglars in buildings and rooms
The very loud acoustic signaling on site causes uncertainty and disorientation in rooms
Live video surveillance for indoor
Real-time video surveillance for indoor areas enables continuous monitoring and rapid intervention in case of suspicious situations or security incidents.
Live video surveillance for outdoor
Real-time video surveillance for outdoor areas ensures constant monitoring and protection against unauthorized access or vandalism.
Video recording of building access
Automatic video recording at access ensures a comprehensive security protocol and enables subsequent checks.
Video recording during alarm and fault situations
When an alarm is triggered, a video recording is automatically started to document possible incidents or alarm situations.Delivery Contents
- 1x SiteManager-(KSM-DR-02)
- 1x MultiSensor-LAN (KMS-LAN-B-BLE)
- 2x MultiSensor-DOOR (KMS-DOOR-B-BLE)
- 2x SlimLine patch cable 3m
- 1x Kentix360 SIM card (DE/AT/CH)
