Skip to main content Skip to search Skip to main navigation

Expansion module with 8 analog inputs

For connection of analog industrial sensors with 0-10V or 4-20mA signal. Based on these signal interfaces, there is a wide range of individual sensors for almost all applications on the market (gases, fill levels, status values, and many more).
The I/O expansion module connects to an AlarmManager/SiteManager and is used to connect external measured values to KentixONE. The communication takes place via Ethernet. Thus, the module can be mounted at any location. The configuration is done in KentixONE.
8 analog inputs for measured values Up to 32 modules
Skip product gallery

Extensions

slide 6 to 8
Skip product gallery

Accessories

slide 1 to 2

Monitor and control cold room and refrigerator temperature

Continuous monitoring of cold rooms and refrigerators to ensure the integrity of food and medicines.

Delivery Contents

  • 1 IO module
  • 1 DIN rail adapter
  • 1 SlimLine cable 3m

Specifications

Erweiterungsmodul mit 8 Analog-Eingängen – DATENBLATT

FunktionErweiterungsmodul zum Anschluss von bis zu 8 externen Analogeingängen. Da die Kommunikation über Ethernet erfolgt, kann das Modul an beliebiger Stelle montiert werden. Die Konfiguration erfolgt über die KentixONE-Softwareoberfläche. Über den integrierten Web-Server bietet das Modul eine einfache IP-Konfiguration und den Test der Eingänge ohne zusätzliche Software.
AnschlussmöglichkeitKentixONE
KonfigurationIntegr. Web-Server (HTTP)
Default IP: 192.168.255.1 (Admin/Admin)
ProtokolleModbus Kommunikation über IP-Port: 502 (Default)
SicherheitID, Passwort und IP-Filter
AnschlussklemmenSteckbare Schraubklemmen für Kabel bis 1mm²
Eingänge8x differentielle Analogeingänge mit 16-bit Auflösung
Samplingrate 10Hz und Spannungseingang 0-10V oder Stromeingang 4-20mA, Genauigkeit 0,1%
Externe SensorenAnaloge Sensoren mit: Spannungsausgang 0-10V (Default)
Stromausgang 4-20mA (Muss per Jumper aktiviert werden)
Digitale Ausgänge: Open Collector (max. 700mA, 5-50 VDC)
Ausgänge4 digitale Ausgänge – nicht nutzbar
IsolierungEthernet 1,5kVDC, I/O 3,7kVrms
UmgebungBetriebstemperatur -20°C bis +60°C, Rel. Luftfeuchtigkeit 10-90%
NetzwerkLAN 10/100 Base-TX
SpannungsversorgungPoE (Class 1) oder externes Netzteil 12-30VDC, 4.3Watt
Gehäuse72 x 123 x 35 mm (DIN-Schienen Montage)
LieferumfangKIO7017, 3m Patchkabel, Power-Anschlusskabel, Anleitung
ZertifizierungCE
ZubehörNetzteil oder PoE-Injektor falls keine PoE Versorgung vorhanden ist.
Hi, I'm KAI and I answer all questions about Kentix