19-Inch 4U Mounting Frame with DIN-Rail 35mm, Dual-Power Supply 24VDC/75W
- 19" 4U mounting frame for SiteManager-EM
- Dual power supply 2x24VDC/75W
- Up to 12 modules
19" mounting frame with 4U and dual power supply 2x24VDC/75W with automatic switching, for mounting up to 12 modules (TE) on DIN rail (35mm), power supply: 2x110-240VDC (C13) Height: 176mm, material: sheet metal 2mm, scope of delivery: 19" frame
Alarm sounder for in-/outdoor installation
Sysport (TYPE A)
- Sound alarm
- Red flash LED
- Protection class IP65
- Plug'n'Play connection
The alarm siren can be installed inside and outside the building. It is a combination signal transmitter and a decisive component of a fully functioning alarm chain. In the event of an alarm, the siren generates a very loud signal tone of up to 110 dB sound pressure. In addition to the acoustic protection, a visual alarm is triggered by a colored flashing light (flash frequency: 1 Hz) that is visible from far away. Due to the robust ABS housing, the compact alarm can be used outdoors. The connection is made via an RJ45 patch cable (10m included) directly to the Kentix systemport (TYPE A).
19-Inch 4U Mounting Frame with DIN-Rail 35mm
19" mounting frame with 4U for mounting up to 22 modules (Division Units) on DIN rail (35mm), height: 176mm, material: sheet metal 2mm, scope of delivery: 19" frame
19-Inch Mounting Frame for Kentix Devices (KAM, KMS, KXP, KPM)
- 1-HE mounting frame
- optimal alignment
- optimal installation
1-HE mounting frame made of sheet metal for mounting up to four Kentix devices in a 19" IT rack. The following devices can be mounted: KAM-BASIC/PRO (1-piece), KXP- 16, KMS-LAN, KMS-LAN-RF, KMS-RF, KMS-TI. By placing the devices in the rack, they are protected against unauthorized access and there is no need for additional cabling in the server room.
External Magnet Antenna GSM/3G/4G with 2.5m Cable
External antenna for better gain of GSM (+5dBi) communication (AlarmManager). Cable. 2.5m with connector SMA (Male), suitable for AlarmManager-PRO/BASIC
3-Port PoE Extender 10/100MBit
LAN (PoE)
Unmanaged PoE extender with 2*10/100M RJ45 ports and 1*10/100M RJ45 uplink port. Port 1-2 supports the IEEE 802.3 af/at PoE standard. The maximum PoE power of a port is 30 W and the maximum PoE output power is 24 W. As a PoE power supply device, it can automatically detect and identify devices that comply with the standards and supply them with power via network cables and supply PoE end devices such as MultiSensors, AccessManagers, IP cameras with power via network cables and extends the twisted pair PoE transmission up to 200 metres. Scope of delivery: PoE Extender
POE-Injector with integrated power-plug (EU)
- PoE injector for power supply
- Integrated EU plug
For power supply of PoE end devices if no PoE switch is available. Plug & Play, requires no configuration. Operating voltage: 100-240 V ± 10%, 50 Hz (EURO plug), output values: 48V DC, 350 mA, standard: IEEE 802.3af, Ethernet ports: 1 x 10/100 Base-T, 1 x 10/100 Base-T with PoE, housing: plastic, colour: black, dimensions: 45 mm x 85 mm x 66 mm (W x H x D , weight: approx. 96 g, safety: CE
POE-Injector with external power-supply (EU)
- PoE injector for power supply
- External EU plug
For power supply of PoE devices (e.g. MultiSensor-LAN, AlarmManager, etc.) if no PoE switch is available for powering via the network-cable. Cable lenght up to 100m. Automatic power selection of the device. Plug 'n play, no configuration needed. Output power 15,4W. Content of delivery: PoE Injector, power-supply 48V/DC, user-manual
19-Inch Mounting Bracket for MultiSensors (Type: KMS-xx)
- 1-HE mounting bracket
- Optimal alignment
1-HE mounting bracket made of sheet metal for mounting Kentix MultiSensors in a 19" IT rack. Suitable for mounting of KMS-LAN, KMS-LAN-RF, KMS-RF, KMS-TI, KXP-16, KPM-100. The sensor mounting is done in optimal downward orientation. The rack mounting protects the devices against unauthorized access and eliminates the need for additional cabling in the server room.
Power Supply (EU) 24VDC/12Watt
Power supply (EU) for supply of Kentix SiteManager (KSM-DR1-x), connection via 2-pole plug (WAGO 714-102), Input Voltage 100-240VAC, Output Voltage 24VDC/0.5A, Temperature Range 0-50°C, Size 43,5x33x39mm, Weight ca. 110g
Magnetic holder for Kentix Devices (KAM, KMS, KXP, KPM)
- Magnet mounting bracket
Magnetic holder for mounting a Kentix device on metallic surfaces, e.g. in a 19" IT rack. Suitable for KAM-BASIC / PRO, KXP-16, KMS-LAN, KMS-LAN-RF, KMS- RF, KMS-RF-BAT, KMS-TI.
CO Testgas for MultiSensor gas test
For testing MultiSensors. Targeted test of the CO sensor unit in the MultiSensor-RF/-LAN, non-combustible. Composition 1.850ppm mol carbon monoxide, rest nitrogen.
Micro SD Card 32GB
microSDHC card, memory: 32GB, read (up to) 120 MB/s, write (up to) 60 MB/sType, suitable for all Kentix products with SD card holder. Specification Class 10, U1, A1, Needed for: Backups, image/video recording, update distribution.
Battery Lithium 1/2AA-3.6V (KMS-DOOR, KMS-ROOM)
Tested and recommended replacement battery for: KMS-DOOR-x, KMS-ROOM-xLithium-Thionylchlorid battery 3.6V, size: 1/2AA (LS14250), capacitiy: 1.200mAh, weight 10g, temperature range: -40°C - 80°C(Pictures and manufacturer may vary)
Slim-Line Patchcable black 5m (CAT 6)
Cable for power supply of MultiSensor and AlarmManager.Suitable as a network cable (CAT6, UTP).For connection with adapter KIO1/2/3.