Magnet Door-Contact, white, 2m cable with RJ45 for Kentix-Systemport Type A/B
Sysport (TYPE A)
Sysport (TYPE B)
Door contact for direct connection to Kentix system jack. Contact: NO, cable lenght 2 m with Kentix system-connector (RJ45), color: white, Size: (L x H x W) 11 x 12 x 48 mm, Delivery: Magnet-contact with mounting material
StarterSet SmartMonitoring with MultiSensors (Ethernet-BLE)
KentixONE
LAN (PoE)
Radio (BLE)
Battery
Sysport (TYPE A)
4G-Modem
Starter set for entry into Kentix SmartMonitoring technology for seamless room and building monitoring. Expandable at any time with SmartAccess, SmartVideo and SmartPDU devices. Already integrated KentixONE software via web server (HTTPS) and 4G modem for redundant SMS alarming.Monitoring of:Temperature, humidity, climate control, smoldering fire / fire / fire gases (CO), intrusion / unauthorized access, access to unauthorized sub-areas (racks/cabinets), line loss / cable defects, failure of active system components, failure of services (HTTP,SMTP,VPN etc.), defective equipment fans, mains voltage failure, UPS defect failure, UPS remaining runtime and capacity.Possibility to connect up to 250 MultiSensors via radio and LANIntegrated LTE modem with slot for SIM card SNMP for integration into monitoring systemsAlarming via E-MAIL (SSL), SMS or SNMP trap
US$2,063.66
excl. VAT
MultiSensor-LAN with PoE (Black)
KentixONE
LAN (PoE)
Radio (BLE)
Sysport (TYPE A)
- Integrated sensors: 8
- Monitored threats: up to 19
- Web server (HTTPS)
- E-MAIL - SNMP-V2/3 - REST-API
- LAN-RADIO (BLE) repeater integrated
MultiSensor for comprehensive room monitoring of up to 20 hazards. Monitors an area of approx. 20-25m². Connection is via Ethernet with PoE (Class 1) and thus requires no further cabling.
Operation is possible as a stand-alone sensor with already integrated KentixONE software (HTTPS) or via a networked KentixONE system with AlarmManager or SiteManager. It is mounted on the ceiling using the supplied mounting bracket. Optionally, mounting in the IT rack is also possible with the 19" bracket (accessory).Integrated sensors: temperature, humidity, dew point, carbon monoxide sensor (CO), 360° PIR motion sensor, 3-axis G-sensor, digital input/outputs.Also ideal as an independent room sensor to complement network monitoring systems (PRTG, Nagios, CheckMK, etc) via SNMP-V2/3 or REST API. The sensor can also send alarm email in stand-alone mode.
US$571.73
excl. VAT
Dual SmartPDU 19"-2HE with 2x 8/C13 (IEC60320), 16A (A+B) with RCM
KentixONE
LAN (PoE)
Sysport (TYPE B)
MID approved
- Calibrated dual current measurement (MID)
- RCM residual current measurement
- Temperature, humidity, dew point, vibration, early fire detection
- IEC Lock plug protection
- RFID rack locking system can be connected directly
Dual SmartPDU with separate A+B feed as a system solution with integrated Kentix MultiSensor technology and 2 height units, RCM and calibrated current measurement. The SmartPDU can be easily managed centrally using the integrated KentixONE software. The electronics of the SmartPDU are supplied via PoE, i.e. in the event of a power failure, both the sensors and the management of the PDU are guaranteed by a UPS-buffered PoE switch. In addition, further digital inputs/outputs are available via the Kentix system port, as well as the option of connecting electronic RFID rack levers directly.Ideal for IT/OT applicationsThe Dual SmartPDU are two PDUs in one housing and are therefore particularly cost and space-saving. All the advantages of two separate PDUs with separate power supply and intelligent monitoring are retained.16xC13 IEC60320 IEC-Lock lockable socketsfuse protection 10A per group (C-type)mains connection 2xC20 (A+B) IEC plugmeasurement with MID approvalAccuracy class B (EN50470-3 MID)two counting ranges display illuminatedAC/DC differential current measurement (RCM)climate monitoring (Temp/Hum/Dew)2-factor early fire detection (ΔT/Tmax, VOC)frequency 45-54Hz (0.01Hz)temperature range 0 to 50°Cpower supply 230/400VACconnected load 4.6KVApower consumption approx. 5Wsize (LxWxH) 483x88x88mmprotection class IP20
SmartPDU 40U with 24/C13-6/C19 (IEC60320), 3-phase 32A with RCM
KentixONE
LAN (PoE)
Sysport (TYPE B)
MID approved
- Calibrated dual current measurement (MID)
- RCM residual current measurement
- Temperature, humidity, dew point, vibration, early fire detection
- IEC Lock plug protection
- RFID rack locking system can be connected directly
Kentix SmartPDUs are system components for the intelligent expansion of your rack infrastructure. All important sensors and interfaces for future-proof operation are already integrated.24xC13 and 6xC19 IEC sockets IEC-Lock lockable (IEC60320)protection 16A per group (C-type)mains connection IEC60309 connector 32A (ROT) (L1/L2/L3/N/PE/6h)cable connection H07RN-F (6mm2)measurement with MID approvalclass B accuracy (EN50470-3 MID)three counting rangesAC/DC differential current measurement (RCM)climate control (Temp. Hum / Dew)Network connection RJ45 (PoE Ethernet)Frequency 45-54Hz (0.01Hz)Temperature range -10 to 50 ° CPower supply 230VACPower consumption 22KVAPower consumption approx. 5WSize (LxWxH) 1770x78.1x62. 5mmprotection class IP20
MultiSensor-DOOR
Radio (BLE)
Battery
- Integrated sensors: 6
- Monitored threats: up to 10
- Wireless (BLE)
- Battery (approx. 4 years)
Ultra-compact MultiSensor for intrusion and status monitoring of doors and windows including ambient monitoring of temperature, humidity and dew point. The sensor is additionally equipped with a 3-axis G-sensor and detects vibration and position changes (sabotage detection, attempted break-in, glass breakage).The MultiSensor-DOOR replaces classic door contacts and can be mounted very easily by gluing or screwing it on. The supplied door/window magnet serves as a counterpart for secure opening detection.The MultiSensor-DOOR is battery operated and has a long battery life (up to four years). It is connected to an MultiSenor-LAN via radio (BLE).
Delivery Contents
- 1 magnetic contact
- 1 plug (RJ45)
- Mounting material