SmartPDU 40HE with 24/C13-12/C19 (IEC60320), 3-phase 32A with RCM
KentixONE
LAN (PoE)
Sysport (TYPE B)
MID approved
SmartPDU as a system solution with integrated Kentix MultiSensor technology and 40 height units, RCM and calibrated current measurement. The SmartPDU can be easily managed centrally using the integrated KentixONE software. The electronics of the SmartPDU are supplied via PoE, i.e. in the event of a power failure, both the sensors and the management of the PDU are guaranteed by a UPS-buffered PoE switch. In addition, further digital inputs/outputs are available via the Kentix system port, as well as the option of connecting electronic RFID rack levers directly.Ideal for data center applications
Ideal for data center applications
The integrated KentixONE software makes the SmartPDUs ideal for high-availability power supplies in data centers. Software management and deployment, environmental monitoring, early fire detection, direct control of electronic rack locks and much more make them one of the best PDUs for data center applications on the market.
At a glance:
- Various socket outlet variants available
- IEC lockable IEC sockets (IEC60320)
- Monitored fuses 10/16A per group (C-type)
- Mains connection IEC60309 plug 16-32A (CEE) depending on type
- Cable connection 3m H05VV-F (up to 6mm2) depending on type
- Calibrated measurement with MID approval, three counting ranges
- AC/DC residual current measurement (RCM)
- Type 3 surge protection (optional)
- Climate monitoring (temp/hum/dew)
- 2-factor early fire detection (ΔT/Tmax, VOC)
- G-sensor for vibration
- 100Mbit Ethernet with PoE (Class 0)
- Frequency 45-54Hz (0.01Hz)
- Temperature range 0 to 50°C
- Power supply 230VAC, 3x230/400VAC depending on type
- Connected load 7.3-44KVA depending on type
- Cable consumption approx. 5W
- Size (LxWxH) 1770x78.1x62.5mm
- Protection class IP20
Skip product gallery
Power cords with locking
IEC-Lock power cable, IEC60320 C19/C13, 16A, 250VAC, RED
3m power supply cable RED with IEC60320 C19 to IEC60320 C20 plug, IEC-Lock interlock, cable: H05VV-F 3G1.5, suitable for devices of protection class I according to IEC61140 Nominal power 16A/250VAC at 50/60Hz, -25 to 70°C operating temperature range.
IEC-Lock power cable, IEC60320 C19/C13, 16A, 250VAC, BLACK
3m power supply cable BLACK with IEC60320 C19 to IEC60320 C20 plug, IEC-Lock interlock, cable: H05VV-F 3G1.5, suitable for devices of protection class I according to IEC61140 Nominal power 16A/250VAC at 50/60Hz, -25 to 70°C operating temperature range.
IEC-Lock power cable, IEC60320 C14/C13, 10A, 250VAC, RED
3m power supply cable RED with IEC60320 C13 to IEC60320 C14 plug, IEC-Lock interlock, cable: H05VV-F 3G1, suitable for devices of protection class I according to IEC61140 Nominal power 10A/250VAC at 50/60Hz, -25 to 70°C operating temperature range.
IEC-Lock power cable, IEC60320 C14/C13, 10A, 250VAC, BLACK
3m power supply cable BLACK with IEC60320 C13 to IEC60320 C14 plug, IEC-Lock interlock, cable: H05VV-F 3G1, suitable for devices of protection class I according to IEC61140 Nominal power 10A/250VAC at 50/60Hz, -25 to 70°C operating temperature range.
Skip product gallery
Accessories
Mounting spacer for Kentix SmartPDU with 40HE (round, alu)
Round mounting bracket made of aluminum for quick mounting of the Kentix SmartPDU with 40U via two suspension points on the back of the PDU. Scope of delivery: 2pc. round mounting brackets with 2pc. countersunk screws (M4)
DoorLock-RA4-IP Rack Handle (MIFARE® DESFire)
KentixONE
LAN (PoE)
RFID
- RFID & PIN
- LED: RED-GREEN
- Up to 16 Lifthandles/Ethernetport (PoE)
- Chassis: Metal-Plastic
IT cabinet handle (left turning) in robust metal-plastic design as folding lever handle. This means that the handle does not require a swivel range and enables ergonomic handling. The connection is made completely via patch cable. Up to 16 handles can be connected per Kentix SmartRelay. Any number of SmartRelays can be networked together. A reed contact can be connected to a distribution box to each IP rack handle to reliably monitor the closing and locking status of the rack door. The power supply is PoE and is therefore easily integrated into the UPS power supply.
A/B front foil set (BLUE/ROT) for 2 SmartPDU 40U
Self-adhesive film set for labelling the SmartPDU across all module areas (L1/L2/L3/TOP/A-B). Scope of delivery: 10 pieces of filmIMPORTANT! When ordering with SmartPDU, the foil set is cost-neutral and is fitted at the factory.
C/D front foil (ORANGE) for SmartPDU 40HE
Self-adhesive film set for labelling the supply path with ‘C’ and ‘D’.IMPORTANT! When ordering with SmartPDU, the foil set is cost-neutral and is fitted at the factory.
Use Cases
Measure and monitor power supply in IT/OT rack
The PDU reliably supplies power to devices in IT racks, monitors key parameters including differential current, and ensures environmental monitoring of the rack
Switching on/off IT devices in the rack
Remote power on/off of IT devices through the PDU provides convenient management and reduces downtime or service calls
Measure and monitor power supply in IT/OT rack
The PDU reliably supplies power to devices in IT racks, monitors key parameters including differential current, and ensures environmental monitoring of the rack
Switching on/off IT devices in the rack
Remote power on/off of IT devices through the PDU provides convenient management and reduces downtime or service calls
Delivery Contents
- SmartPDU with 3m connection cable and plug
- 2x 90° angle bracket
- 8x countersunk head screws M3x15 with hexagon socket 2mm
- Test report
