Kentix DoorLock network rack handle
Rack access for IT/OT racks reinvented
- Ergonomic handle as lifting lever in metal-plastic design, requires no swivelling range
- Connection with SmartPDU (up to 2 handles) or AccessManager (up to 16 handles)
- Closing and locking status is permanently monitored by door contact
- Power supply via PoE enables integration into UPS power supply
- Simple management via integrated KentixONE web interface
Rack handle functions at a glance
Ergonomic Lever Handle
LDAP and Active Directory Integration
Open Rack Doors with a Smartphone
Rack Access with Video Recording
Simple Connection to SmartPDU
Intuitive Software Operation
IoT rack handles for IT- and Serverrack
- RFID & PIN
- LED: RED-GREEN
- Up to 16 Lifthandles/Ethernetport (PoE)
- Chassis: Metal-Plastic
Direction of rotation of the axle for our lifting handles
The KXC-RA4 is available in two axle rotation directions (right/left). As the lift handle always performs the same movement, the gearbox or the axis rotation must be set according to the L/R door side.IMPORTANT! It is essential to note the required direction of rotation of the axle when ordering.
TIP: The direction of rotation can always be seen from the rear of the door or lever. It is always the same as the side on which the door hinges are located.
Distribution Boxes for IT cabinets
- Distribution box for rack levers and door contacts in the rack
- For connection to AccessManager (ART: KXP-2-RS)
- 2x rack levers can be connected (ART: KXC-RA4-xxx-x)
- 2x door contacts can be connected (ART: KDC1-W)
- MIFARE®DESFire®
- RFID key fob Ø36mm
- Kentix security application
- Without print
What are the Distribution Boxes needed for?
The distribution boxes are required to network the components for front/rear door with rack levers and door contacts in the rack. Depending on the connection type of the rack lever, either via the direct networking of several levers in bus topology, or the connection to a Kentix SmartPDU.
One distributor is required per cabinet, to which the rack handle, the door contact and the networking among each other are then connected. The advantage, for 8 racks with 16 doors only one Ethernet port with PoE is needed.
Mechanical adapters for different rack manufacturer
Mechanical adapters for various rack manufacturers
On most IT racks, the Kentix cabinet lever fits without mechanical adjustment by means of an adapter. This is guaranteed by the standard 50 mm pitch dimension. However, there are some manufacturers who design proprietary locking systems. For the most common manufacturers, we offer mechanical adapters that are simply mounted between the cabinet and the lever. Supported cabinet manufacturers: Rittal, Vertiv (Knürr), Stengel, Schäfer, ZPAS, Modulan, and many more. If your required cabinet type is not included, please contact us, we regularly extend the list of manufacturers.
Kentix DoorLock-RA4 Adapter for Rittal TS, TS IT, SE, PC, IW racks
With the appropriate Kentix mechanical adapter for Rittal, our rack levers fit Rittal IT and distribution cabinets. Depending on the type, the adapters are suitable for flat standard doors or doors with design bevel. Variants with door monitoring are available for installation.
Need more information?
Contact us or get to know our products in an online consultation - free of charge and without obligation, of course.
Inside Sales Manager
Kentix locking solutions for IT cabinets
Compared to conventional swing handles, the Kentix DoorLock-RA4 is a so-called lifting lever. The advantage: the handle allows space-saving and very ergonomic operation. The opening process is very convenient, as the lever springs open automatically and can be opened with one pull.
Due to the standard dimensions used (50 mm grid), the handle is already compatible with many rack cabinet types. For manufacturers with proprietary lever mechanisms, such as Rittal or Vertiv, there are corresponding adapter solutions for easy replacement.
In addition to the DoorLock-RA4, we also offer digital locking half cylinders or radio cabinet locks for simple IT distributors.
Direct connection of the rack lever to the Kentix SmartPDU
