Sensors and actuators
Expand your monitoring with external sensors and actuators for climate control, UPS, network monitoring, and fault messages. Simply connect via Ethernet (PoE) or the Kentix system socket (SYSPORT) and integrate into KentixONE.
Network siren with ethernet (PoE)
- Network siren with RGB LED
- Multi-tone buzzer up to 100 dB
- As alarm and status indicator
- Own KentixONE presets
- Wall/ceiling mounting
The network-enabled alarm siren can be installed indoors as well as in sheltered outdoor areas. It combines audible and visual signals and is an important part of a reliable alarm chain.
In the event of an alarm, the siren emits a very loud warning tone adjustable in multiple stages, with up to 100 dB. In addition, a highly visible LED light in freely selectable and mixable colors provides a visual warning.
KentixONE offers many configuration options: Using freely configurable presets, custom information, alarm, or warning states can be represented both visually and acoustically.
Connection and control are provided via Ethernet with PoE through an RJ45 network port.
Water leakage sensor with ethernet (PoE)
- Ethernet leakage sensor with PoE
- Senso sensitivity adjustable
- 2x cable sensor (2x 10m or 20m), 1x chassis sensor
- Auf Kabelbruch überwacht
The Kentix leakage sensor detects water using a conductive measuring principle: it continuously measures the conductivity between multiple electrodes. As soon as moisture or water creates a conductive connection, an early alarm is triggered.
In addition to the sensor inside the housing, the leakage sensor includes two sensor cables (10 m or 20 m). These monitor water ingress along the entire cable length. Sensitivity can be adjusted in KentixONE to suit the environment.
Connection is via Ethernet (PoE). The sensor can operate autonomously and send alarms via email or SNMP v2/v3, or be integrated centrally into KentixONE.
I/O expansion modules for external alarms with Ethernet (PoE)
- 16 digital inputs (for dry contacts)
- connection of external alarm messages
- Integrated web server
- Ethernet 10/100MBit (PoE)
- 16 digital inputs
- connection of external alarm messages
- Integrated web server
- Power over ethernet (PoE)
I/O expansion modules are used to connect external fault and alarm messages via electrical contacts. This makes it easy to integrate and monitor signals from generators, UPS systems, air conditioning units, etc. in KentixONE.
In addition, the integrated web server allows you to test the individual inputs/outputs without any additional software.
When choosing the right I/O module, it is important to know what type of signal you want to connect. In about 80% of cases, potential-free (dry) contacts are used (pure switching contacts without their own voltage). For this, the module with 16 digital inputs (SKU: KIO7053) is the most common and suitable solution. However, voltage-carrying signals (12–50 VDC) as well as analog signals (0–10 VDC or 4–20 mA) can also be integrated using the respective modules.
The connection is made via Ethernet (PoE).
Accessories for the I/O expansion modules
- Temperature sensor Pt1000 class B
- 3 selectable temperature ranges
- Protection class IP66
- Integrated sensor
